This is the latest recevied telemetry packets stored in our database for station/object SP8PB-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792152633 | 91 Count | 848 Count | 0 Count | 0 VDC | 0 VDC |
| 1792151732 | 90 Count | 842 Count | 0 Count | 0 VDC | 0 VDC |
| 1792150832 | 89 Count | 831 Count | 0 Count | 0 VDC | 0 VDC |
| 1792149931 | 88 Count | 822 Count | 0 Count | 0 VDC | 0 VDC |
| 1792149030 | 87 Count | 811 Count | 0 Count | 0 VDC | 0 VDC |
| 1792148129 | 86 Count | 803 Count | 0 Count | 0 VDC | 0 VDC |
| 1792147229 | 85 Count | 787 Count | 0 Count | 0 VDC | 0 VDC |
| 1792146328 | 84 Count | 780 Count | 0 Count | 0 VDC | 0 VDC |
| 1792145427 | 83 Count | 772 Count | 0 Count | 0 VDC | 0 VDC |
| 1792144527 | 82 Count | 764 Count | 0 Count | 0 VDC | 0 VDC |
| 1792143626 | 81 Count | 756 Count | 0 Count | 0 VDC | 0 VDC |
| 1792142725 | 80 Count | 748 Count | 0 Count | 0 VDC | 0 VDC |
| 1792141824 | 79 Count | 741 Count | 0 Count | 0 VDC | 0 VDC |
| 1792140924 | 78 Count | 736 Count | 0 Count | 0 VDC | 0 VDC |
| 1792140023 | 77 Count | 731 Count | 0 Count | 0 VDC | 0 VDC |
| 1792139122 | 76 Count | 724 Count | 0 Count | 0 VDC | 0 VDC |
| 1792138221 | 75 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1792137321 | 74 Count | 708 Count | 0 Count | 0 VDC | 0 VDC |
| 1792136420 | 73 Count | 688 Count | 0 Count | 0 VDC | 0 VDC |
| 1792135519 | 72 Count | 680 Count | 0 Count | 0 VDC | 0 VDC |
| 1792134618 | 71 Count | 669 Count | 0 Count | 0 VDC | 0 VDC |
| 1792133718 | 70 Count | 652 Count | 0 Count | 0 VDC | 0 VDC |
| 1792132817 | 69 Count | 645 Count | 0 Count | 0 VDC | 0 VDC |
| 1792131916 | 68 Count | 635 Count | 0 Count | 0 VDC | 0 VDC |
| 1792131016 | 67 Count | 615 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)