This is the latest recevied telemetry packets stored in our database for station/object YM2KIR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274344 | 541 | 0 | 0 | 0 | 0 |
| 1762292304 | 540 | 0 | 0 | 0 | 0 |
| 1762289296 | 540 | 0 | 0 | 0 | 0 |
| 1762286296 | 540 | 0 | 0 | 0 | 0 |
| 1762283295 | 539 | 0 | 0 | 0 | 0 |
| 1762280293 | 539 | 0 | 0 | 0 | 0 |
| 1762277292 | 540 | 0 | 0 | 0 | 0 |
| 1762274291 | 539 | 0 | 0 | 0 | 0 |
| 1762271291 | 540 | 0 | 0 | 0 | 0 |
| 1762268291 | 541 | 0 | 0 | 0 | 0 |
| 1762265290 | 540 | 0 | 0 | 0 | 0 |
| 1762262281 | 539 | 0 | 0 | 0 | 0 |
| 1762259280 | 540 | 0 | 0 | 0 | 0 |
| 1762256278 | 539 | 0 | 0 | 0 | 0 |
| 1762253278 | 539 | 0 | 0 | 0 | 0 |
| 1762250278 | 540 | 0 | 0 | 0 | 0 |
| 1762247276 | 539 | 0 | 0 | 0 | 0 |
| 1762244273 | 541 | 0 | 0 | 0 | 0 |
| 1762241272 | 540 | 0 | 0 | 0 | 0 |
| 1762238270 | 541 | 0 | 0 | 0 | 0 |
| 1762235269 | 540 | 0 | 0 | 0 | 0 |
| 1762232269 | 540 | 0 | 0 | 0 | 0 |
| 1762229270 | 540 | 0 | 0 | 0 | 0 |
| 1762226269 | 540 | 0 | 0 | 0 | 0 |
| 1762223268 | 540 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)