APRS Track Direct

My position About ☰

reset

HG7PDK-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HG7PDK-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1786726742	13.58 Volt	630 Pkt	280 Pkt	68 Pcnt
1786725360	13.58 Volt	610 Pkt	270 Pkt	67 Pcnt
1786723979	13.58 Volt	590 Pkt	250 Pkt	67 Pcnt
1786722598	13.58 Volt	600 Pkt	250 Pkt	68 Pcnt
1786721217	13.58 Volt	560 Pkt	240 Pkt	69 Pcnt
1786719835	13.58 Volt	560 Pkt	240 Pkt	69 Pcnt
1786718454	13.58 Volt	570 Pkt	250 Pkt	68 Pcnt
1786717072	13.58 Volt	570 Pkt	260 Pkt	68 Pcnt
1786715691	13.43 Volt	620 Pkt	280 Pkt	70 Pcnt
1786714310	13.58 Volt	620 Pkt	270 Pkt	72 Pcnt
1786712928	13.58 Volt	600 Pkt	270 Pkt	71 Pcnt
1786711547	13.58 Volt	620 Pkt	270 Pkt	72 Pcnt
1786710166	13.58 Volt	650 Pkt	280 Pkt	72 Pcnt
1786708784	13.58 Volt	730 Pkt	310 Pkt	76 Pcnt
1786707403	13.43 Volt	730 Pkt	320 Pkt	78 Pcnt
1786706022	13.58 Volt	710 Pkt	330 Pkt	78 Pcnt
1786704645	13.58 Volt	730 Pkt	310 Pkt	76 Pcnt
1786703261	13.58 Volt	760 Pkt	320 Pkt	78 Pcnt
1786701878	13.58 Volt	760 Pkt	340 Pkt	78 Pcnt
1786700497	13.58 Volt	790 Pkt	380 Pkt	85 Pcnt
1786699115	13.58 Volt	810 Pkt	370 Pkt	86 Pcnt
1786697735	13.58 Volt	740 Pkt	340 Pkt	82 Pcnt
1786696353	13.43 Volt	760 Pkt	350 Pkt	82 Pcnt
1786694971	13.58 Volt	750 Pkt	340 Pkt	84 Pcnt
1786693591	13.58 Volt	780 Pkt	360 Pkt	91 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)