APRS Track Direct

My position About ☰

reset

OE3XTV Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3XTV. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1732289813	13.8 Volt	190 Pkt	10 Pkt	89 Pcnt	20 Grad
1732289513	13.8 Volt	190 Pkt	10 Pkt	88 Pcnt	20 Grad
1732289213	13.8 Volt	200 Pkt	10 Pkt	89 Pcnt	20 Grad
1732288614	13.8 Volt	200 Pkt	10 Pkt	89 Pcnt	20 Grad
1732288613	13.8 Volt	200 Pkt	10 Pkt	89 Pcnt	20 Grad
1732288013	13.8 Volt	210 Pkt	10 Pkt	90 Pcnt	20 Grad
1732287713	13.8 Volt	200 Pkt	10 Pkt	91 Pcnt	20 Grad
1732287413	13.8 Volt	200 Pkt	10 Pkt	90 Pcnt	20 Grad
1732286815	13.8 Volt	220 Pkt	10 Pkt	91 Pcnt	20 Grad
1732286813	13.8 Volt	220 Pkt	10 Pkt	91 Pcnt	20 Grad
1732286213	13.8 Volt	210 Pkt	10 Pkt	88 Pcnt	20 Grad
1732285914	13.8 Volt	200 Pkt	10 Pkt	88 Pcnt	20 Grad
1732285613	13.8 Volt	210 Pkt	10 Pkt	87 Pcnt	20 Grad
1732285013	13.8 Volt	200 Pkt	10 Pkt	88 Pcnt	20 Grad
1732285013	13.8 Volt	200 Pkt	10 Pkt	88 Pcnt	20 Grad
1732284413	13.8 Volt	220 Pkt	10 Pkt	86 Pcnt	20 Grad
1732284114	13.8 Volt	210 Pkt	10 Pkt	84 Pcnt	20 Grad
1732283813	13.8 Volt	210 Pkt	10 Pkt	82 Pcnt	20 Grad
1732283213	13.8 Volt	180 Pkt	10 Pkt	81 Pcnt	20 Grad
1732283213	13.8 Volt	180 Pkt	10 Pkt	81 Pcnt	20 Grad
1732282613	13.8 Volt	210 Pkt	10 Pkt	82 Pcnt	20 Grad
1732282314	13.8 Volt	210 Pkt	10 Pkt	82 Pcnt	20 Grad
1732282013	13.8 Volt	220 Pkt	10 Pkt	82 Pcnt	20 Grad
1732281414	13.8 Volt	200 Pkt	10 Pkt	83 Pcnt	20 Grad
1732281413	13.8 Volt	200 Pkt	10 Pkt	83 Pcnt	20 Grad

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)