APRS Track Direct

My position About ☰

reset

9W8AKN-A Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W8AKN-A. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1762194815	30 Pkt	1 Pkt	-71 dBm	5.19 V
1762192988	27 Pkt	1 Pkt	-71 dBm	5.19 V
1762191161	32 Pkt	0 Pkt	-71 dBm	5.19 V
1762189334	33 Pkt	0 Pkt	-73 dBm	5.17 V
1762187506	33 Pkt	2 Pkt	-70 dBm	5.19 V
1762185676	28 Pkt	0 Pkt	-72 dBm	5.17 V
1762183850	32 Pkt	2 Pkt	-75 dBm	5.19 V
1762182021	33 Pkt	0 Pkt	-72 dBm	5.21 V
1762180193	2 Pkt	1 Pkt	-73 dBm	5.19 V
1762178724	32 Pkt	0 Pkt	-66 dBm	5.17 V
1762176896	31 Pkt	1 Pkt	-76 dBm	5.19 V
1762175068	32 Pkt	0 Pkt	-78 dBm	5.19 V
1762173240	33 Pkt	1 Pkt	-73 dBm	5.17 V
1762171411	31 Pkt	1 Pkt	-75 dBm	5.19 V
1762169583	33 Pkt	0 Pkt	-73 dBm	5.17 V
1762167755	32 Pkt	4 Pkt	-71 dBm	5.19 V
1762165927	7 Pkt	3 Pkt	-74 dBm	5.17 V
1762165504	32 Pkt	1 Pkt	-69 dBm	5.19 V
1762163676	37 Pkt	0 Pkt	-69 dBm	5.17 V
1762161849	36 Pkt	0 Pkt	-73 dBm	5.13 V
1762160021	38 Pkt	1 Pkt	-72 dBm	5.19 V
1762158193	35 Pkt	0 Pkt	-71 dBm	5.19 V
1762156364	34 Pkt	0 Pkt	-70 dBm	5.19 V
1762154536	25 Pkt	0 Pkt	-68 dBm	5.17 V
1762152709	34 Pkt	2 Pkt	-68 dBm	5.19 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)