APRS Track Direct

My position About ☰

reset

OK1JRA-16 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK1JRA-16. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkts*	RF->Inet*	DX_dist.*	live*	Temp_core*
1754136195	3 Pkts	3 Pkts	49 km	54 min.	35.56 C
1754135294	4 Pkts	4 Pkts	74 km	53 min.	32.22 C
1754134393	4 Pkts	4 Pkts	49 km	52 min.	29.44 C
1754133493	5 Pkts	4 Pkts	50 km	51 min.	53.33 C
1754132591	17 Pkts	17 Pkts	121 km	50 min.	28.89 C
1754131690	0 Pkts	0 Pkts	0 km	49 min.	53.33 C
1754130789	23 Pkts	23 Pkts	58 km	48 min.	30 C
1754129889	4 Pkts	4 Pkts	49 km	47 min.	53.33 C
1754128987	12 Pkts	12 Pkts	49 km	46 min.	53.33 C
1754128086	5 Pkts	5 Pkts	16 km	45 min.	53.33 C
1754127185	17 Pkts	17 Pkts	49 km	44 min.	53.33 C
1754126284	17 Pkts	17 Pkts	49 km	43 min.	52.22 C
1754125383	7 Pkts	7 Pkts	71 km	42 min.	53.33 C
1754124483	3 Pkts	3 Pkts	33 km	41 min.	53.33 C
1754123582	6 Pkts	6 Pkts	0 km	40 min.	30 C
1754122680	4 Pkts	4 Pkts	0 km	39 min.	53.33 C
1754121779	6 Pkts	6 Pkts	0 km	38 min.	53.33 C
1754120878	2 Pkts	2 Pkts	49 km	37 min.	31.11 C
1754119977	6 Pkts	5 Pkts	0 km	36 min.	53.33 C
1754119076	2 Pkts	2 Pkts	0 km	35 min.	53.33 C
1754118175	9 Pkts	9 Pkts	0 km	34 min.	53.33 C
1754117274	7 Pkts	7 Pkts	0 km	33 min.	53.33 C
1754116374	5 Pkts	5 Pkts	49 km	32 min.	53.33 C
1754115472	3 Pkts	3 Pkts	0 km	31 min.	53.33 C
1754114571	2 Pkts	2 Pkts	49 km	30 min.	53.33 C

*Used Equation Coefficients:

RxPkts: 0, 1, 0

RF->Inet: 0, 1, 0

DX_dist.: 0, 1, 0

live: 0, 1, 0

Temp_core: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)