APRS Track Direct

My position About ☰

reset

PU4RON Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PU4RON. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TxTraffic*	RSSI*	Voltage*
1754714379	12 Pkt	-48 dBm	0.08 V
1754713756	14 Pkt	-48 dBm	0.08 V
1754713133	4 Pkt	-47 dBm	0.08 V
1754712511	18 Pkt	-48 dBm	0.08 V
1754711889	11 Pkt	-48 dBm	0.08 V
1754711267	12 Pkt	-47 dBm	0.08 V
1754710645	10 Pkt	-49 dBm	0.08 V
1754710022	12 Pkt	-47 dBm	0.08 V
1754709400	8 Pkt	-50 dBm	0.08 V
1754708778	20 Pkt	-48 dBm	0.08 V
1754708155	10 Pkt	-49 dBm	0.08 V
1754707533	16 Pkt	-49 dBm	0.08 V
1754706910	9 Pkt	-49 dBm	0.08 V
1754706288	22 Pkt	-49 dBm	0.08 V
1754705665	17 Pkt	-49 dBm	0.08 V
1754705043	29 Pkt	-49 dBm	0.08 V
1754704419	41 Pkt	-50 dBm	0.08 V
1754703796	37 Pkt	-51 dBm	0.08 V
1754703173	17 Pkt	-52 dBm	0.08 V
1754702550	22 Pkt	-58 dBm	0.08 V
1754701927	9 Pkt	-52 dBm	0.08 V
1754701305	22 Pkt	-52 dBm	0.08 V
1754700682	21 Pkt	-49 dBm	0.08 V
1754700059	25 Pkt	-49 dBm	0.08 V
1754699437	38 Pkt	-53 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)