APRS Track Direct

My position About ☰

reset

IZ4GWE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ4GWE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff*
1790646506	152 Pkt	1010 Pkt	0.19 Pcnt	71 Pcnt
1790646206	147 Pkt	1000 Pkt	0.19 Pcnt	71 Pcnt
1790645906	145 Pkt	1000 Pkt	0.19 Pcnt	71 Pcnt
1790645605	152 Pkt	1000 Pkt	0.19 Pcnt	71 Pcnt
1790645305	142 Pkt	990 Pkt	0.19 Pcnt	71 Pcnt
1790645005	158 Pkt	980 Pkt	0.19 Pcnt	71 Pcnt
1790644705	159 Pkt	970 Pkt	0.19 Pcnt	71 Pcnt
1790644404	148 Pkt	960 Pkt	0.19 Pcnt	71 Pcnt
1790644104	150 Pkt	960 Pkt	0.19 Pcnt	71 Pcnt
1790643804	167 Pkt	980 Pkt	0.19 Pcnt	71 Pcnt
1790643503	161 Pkt	960 Pkt	0.19 Pcnt	71 Pcnt
1790643203	157 Pkt	980 Pkt	0.19 Pcnt	71 Pcnt
1790642903	149 Pkt	980 Pkt	0.19 Pcnt	71 Pcnt
1790642602	144 Pkt	970 Pkt	0.19 Pcnt	71 Pcnt
1790642302	139 Pkt	940 Pkt	0.19 Pcnt	71 Pcnt
1790642002	143 Pkt	950 Pkt	0.19 Pcnt	71 Pcnt
1790641702	130 Pkt	920 Pkt	0.19 Pcnt	71 Pcnt
1790641401	137 Pkt	930 Pkt	0.19 Pcnt	71 Pcnt
1790641101	146 Pkt	910 Pkt	0.19 Pcnt	71 Pcnt
1790640801	169 Pkt	910 Pkt	0.19 Pcnt	71 Pcnt
1790640500	154 Pkt	880 Pkt	0.19 Pcnt	71 Pcnt
1790640200	177 Pkt	860 Pkt	0.19 Pcnt	71 Pcnt
1790639900	177 Pkt	860 Pkt	0.19 Pcnt	71 Pcnt
1790639600	141 Pkt	830 Pkt	0.19 Pcnt	71 Pcnt
1790639299	103 Pkt	810 Pkt	0.19 Pcnt	71 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)