This is the latest recevied telemetry packets stored in our database for station/object BAXTER. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274293 | 13.7 | 0 | 0 | 0 | 1.1 |
| 1778038119 | 13.7 | 0 | 0 | 0 | 11.2 |
| 1778036319 | 13.7 | 0 | 0 | 0 | 1 |
| 1778034519 | 13.7 | 0 | 0 | 0 | 1.1 |
| 1778032720 | 13.7 | 0 | 0 | 0 | 0.8 |
| 1778030919 | 13.7 | 0 | 0 | 0 | 11.2 |
| 1778029120 | 13.7 | 0 | 0 | 0 | 11.2 |
| 1778027320 | 13.7 | 0 | 0 | 0 | 11.2 |
| 1778025522 | 13.7 | 0 | 0 | 0 | 11.2 |
| 1778023720 | 13.7 | 0 | 0 | 0 | 11.2 |
| 1778021921 | 13.7 | 0 | 0 | 0 | 1.1 |
| 1778020120 | 13.7 | 0 | 0 | 0 | 1.1 |
| 1778018320 | 13.7 | 0 | 0 | 0 | 1.1 |
| 1778016521 | 13.7 | 0 | 0 | 0 | 11.2 |
| 1778014721 | 13.7 | 0 | 0 | 0 | 11.2 |
| 1778012921 | 13.7 | 0 | 0 | 0 | 11.2 |
| 1778011121 | 13.7 | 0 | 0 | 0 | 1.1 |
| 1778009321 | 13.7 | 0 | 0 | 0 | 1.1 |
| 1778007521 | 13.7 | 0 | 0 | 0 | 1.1 |
| 1778005721 | 13.7 | 0 | 0 | 0 | 1.1 |
| 1778003921 | 13.7 | 0 | 0 | 0 | 11.3 |
| 1778002122 | 13.7 | 0 | 0 | 0 | 11.2 |
| 1778000322 | 13.7 | 0 | 0 | 0 | 10.7 |
| 1777998522 | 13.7 | 0 | 0 | 0 | 1.1 |
| 1777996722 | 13.7 | 0 | 0 | 0 | 1.1 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)