This is the latest recevied telemetry packets stored in our database for station/object DJ7ACM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790659755 | 24.8 deg C | 41 % | 1021.3 hPa | 0 | 0 |
| 1790658855 | 24.8 deg C | 41.5 % | 1021.5 hPa | 0 | 0 |
| 1790657955 | 24.8 deg C | 41.6 % | 1021.4 hPa | 0 | 0 |
| 1790657055 | 24.9 deg C | 41.9 % | 1021.3 hPa | 0 | 0 |
| 1790656892 | 24.9 deg C | 41.9 % | 1021.3 hPa | 0 | 0 |
| 1790655992 | 25 deg C | 42 % | 1021.2 hPa | 0 | 0 |
| 1790655092 | 25 deg C | 42.1 % | 1021.3 hPa | 0 | 0 |
| 1790654192 | 25 deg C | 42.2 % | 1021.4 hPa | 0 | 0 |
| 1790653292 | 25 deg C | 42.3 % | 1021.5 hPa | 0 | 0 |
| 1790652392 | 25 deg C | 42.3 % | 1021.5 hPa | 0 | 0 |
| 1790652061 | 25.1 deg C | 42.3 % | 1021.5 hPa | 0 | 0 |
| 1790651161 | 25.1 deg C | 42.5 % | 1021.5 hPa | 0 | 0 |
| 1790650261 | 25.1 deg C | 42.6 % | 1021.6 hPa | 0 | 0 |
| 1790649361 | 25.1 deg C | 42.8 % | 1021.6 hPa | 0 | 0 |
| 1790648461 | 25.1 deg C | 43.1 % | 1021.6 hPa | 0 | 0 |
| 1790647561 | 25.2 deg C | 43.1 % | 1021.6 hPa | 0 | 0 |
| 1790646661 | 25.2 deg C | 43.3 % | 1021.5 hPa | 0 | 0 |
| 1790645760 | 25.3 deg C | 43.7 % | 1021.4 hPa | 0 | 0 |
| 1790644860 | 25.2 deg C | 43.9 % | 1021.5 hPa | 0 | 0 |
| 1790643960 | 25.2 deg C | 44 % | 1021.4 hPa | 0 | 0 |
| 1790643060 | 25.2 deg C | 43.8 % | 1021.4 hPa | 0 | 0 |
| 1790642160 | 25.2 deg C | 44 % | 1021.4 hPa | 0 | 0 |
| 1790641260 | 25.2 deg C | 44.4 % | 1021.4 hPa | 0 | 0 |
| 1790640360 | 25.2 deg C | 44.8 % | 1021.3 hPa | 0 | 0 |
| 1790640156 | 25.2 deg C | 44.8 % | 1021.3 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)