APRS Track Direct

My position About ☰

reset

HP3ICC-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP3ICC-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1750315213	1 Pkt	0 Pkt	0 Pkt	-26 dBm	12 V
1750313989	0 Pkt	0 Pkt	0 Pkt	-17 dBm	11.98 V
1750313113	1 Pkt	0 Pkt	0 Pkt	-18 dBm	11.98 V
1750311887	0 Pkt	0 Pkt	0 Pkt	-18 dBm	12.1 V
1750310812	1 Pkt	0 Pkt	0 Pkt	-17 dBm	11.98 V
1750309587	1 Pkt	0 Pkt	0 Pkt	-26 dBm	12.1 V
1750308362	1 Pkt	0 Pkt	0 Pkt	-18 dBm	11.98 V
1750307138	1 Pkt	0 Pkt	0 Pkt	-17 dBm	11.98 V
1750305912	1 Pkt	0 Pkt	0 Pkt	-17 dBm	12 V
1750304687	1 Pkt	0 Pkt	0 Pkt	-18 dBm	11.98 V
1750303462	1 Pkt	0 Pkt	0 Pkt	-25 dBm	12 V
1750302237	0 Pkt	0 Pkt	0 Pkt	-18 dBm	12 V
1750301012	1 Pkt	0 Pkt	0 Pkt	-25 dBm	11.98 V
1750300429	-	-	-	-	-
1750299787	1 Pkt	0 Pkt	0 Pkt	-18 dBm	11.98 V
1750298562	1 Pkt	0 Pkt	0 Pkt	-19 dBm	12 V
1750297337	1 Pkt	0 Pkt	0 Pkt	-18 dBm	11.98 V
1750296112	2 Pkt	0 Pkt	0 Pkt	-19 dBm	11.98 V
1750294887	1 Pkt	0 Pkt	0 Pkt	-19 dBm	12 V
1750293662	2 Pkt	0 Pkt	0 Pkt	-19 dBm	11.98 V
1750292438	1 Pkt	0 Pkt	0 Pkt	-27 dBm	11.98 V
1750291213	1 Pkt	0 Pkt	0 Pkt	-18 dBm	12 V
1750289988	0 Pkt	0 Pkt	0 Pkt	-18 dBm	11.96 V
1750288812	1 Pkt	0 Pkt	0 Pkt	-18 dBm	11.96 V
1750287587	0 Pkt	0 Pkt	0 Pkt	-18 dBm	12 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)