This is the latest recevied telemetry packets stored in our database for station/object W6SRR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | PC Board* | CPU* | Ambient* | Value5* |
|---|---|---|---|---|---|
| 1790651811 | 1354 | 84 | 36.5 | 77.1 | 0 |
| 1790650912 | 1351 | 84 | 37 | 77.2 | 0 |
| 1790650010 | 1354 | 84 | 37 | 77.2 | 0 |
| 1790649111 | 1354 | 84.1 | 37 | 77.2 | 0 |
| 1790648211 | 1354 | 84.1 | 37.6 | 77.3 | 0 |
| 1790647312 | 1354 | 84.1 | 37 | 77.3 | 0 |
| 1790646409 | 1354 | 84 | 37 | 77.3 | 0 |
| 1790645511 | 1353 | 84.1 | 36.5 | 77.2 | 0 |
| 1790644611 | 1354 | 84.1 | 36.5 | 77.3 | 0 |
| 1790643717 | 1358 | 84 | 37 | 77.3 | 0 |
| 1790642810 | 1354 | 83.9 | 36.5 | 77.2 | 0 |
| 1790641912 | 1356 | 83.8 | 36.5 | 77.1 | 0 |
| 1790641011 | 1354 | 83.6 | 36.5 | 77.1 | 0 |
| 1790640112 | 1358 | 83.4 | 36.5 | 76.8 | 0 |
| 1790639210 | 1353 | 83.2 | 36.5 | 76.7 | 0 |
| 1790638311 | 1354 | 83.1 | 36.5 | 76.6 | 0 |
| 1790637410 | 1354 | 82.8 | 36.5 | 76.4 | 0 |
| 1790636511 | 1354 | 82.6 | 36.5 | 76.3 | 0 |
| 1790635609 | 1358 | 82.4 | 35.4 | 76 | 0 |
| 1790634712 | 1354 | 82.2 | 35.9 | 75.9 | 0 |
| 1790633811 | 1354 | 82 | 35.4 | 75.6 | 0 |
| 1790632912 | 1358 | 81.6 | 35.9 | 75.4 | 0 |
| 1790632010 | 1353 | 81.5 | 35.4 | 75.1 | 0 |
| 1790631111 | 1354 | 81.2 | 35.4 | 75 | 0 |
| 1790630211 | 1354 | 80.9 | 35.4 | 74.6 | 0 |
*Used Equation Coefficients:
DC: 0, 1, 1000
PC Board: 0, 0.1, 0
CPU: 0, 0.1, 0
Ambient: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)