This is the latest recevied telemetry packets stored in our database for station/object BG2VZP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750121127 | 8 | 326 | 992 | 1146 | 0 |
| 1750117978 | 10 | 319 | 992 | 1149 | 0 |
| 1750114890 | 10 | 302 | 991 | 1149 | 0 |
| 1750111801 | 10 | 288 | 991 | 1146 | 0 |
| 1750108778 | 9 | 281 | 990 | 1149 | 0 |
| 1750102735 | 7 | 281 | 989 | 1149 | 0 |
| 1750099713 | 8 | 279 | 988 | 1146 | 0 |
| 1750096690 | 7 | 279 | 988 | 1149 | 0 |
| 1750093667 | 8 | 280 | 988 | 1146 | 0 |
| 1750090647 | 8 | 282 | 987 | 1149 | 0 |
| 1750087632 | 6 | 286 | 987 | 1149 | 0 |
| 1750084618 | 6 | 286 | 987 | 1149 | 0 |
| 1750081596 | 7 | 289 | 987 | 1146 | 0 |
| 1750078583 | 8 | 290 | 987 | 1149 | 0 |
| 1750075578 | 8 | 297 | 986 | 1149 | 0 |
| 1750072567 | 8 | 307 | 986 | 1146 | 0 |
| 1750069524 | 9 | 342 | 985 | 1146 | 0 |
| 1750066501 | 8 | 391 | 985 | 1149 | 0 |
| 1750063467 | 6 | 434 | 984 | 1149 | 0 |
| 1750060429 | 10 | 419 | 984 | 1149 | 0 |
| 1750057382 | 9 | 373 | 984 | 1149 | 0 |
| 1750054362 | 8 | 438 | 984 | 1149 | 0 |
| 1750051346 | 10 | 390 | 983 | 1149 | 0 |
| 1750048330 | 9 | 318 | 983 | 1149 | 0 |
| 1750045312 | 6 | 254 | 983 | 1146 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)