This is the latest recevied telemetry packets stored in our database for station/object EL-UB6LSU. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274778 | 0 | 0 | 0 | 0 | 0 |
| 1836274178 | 0 | 0 | 0 | 0 | 0 |
| 1774122620 | 0 | 10 | 0 | 2 | 0 |
| 1774122019 | 0 | 10 | 0 | 2 | 0 |
| 1774121419 | 0 | 0 | 0 | 0 | 0 |
| 1774120820 | 1 | 10 | 1 | 2 | 0 |
| 1774120219 | 0 | 27 | 0 | 4 | 0 |
| 1774119619 | 0 | 37 | 0 | 2 | 0 |
| 1774119019 | 0 | 0 | 0 | 0 | 0 |
| 1774118420 | 0 | 0 | 0 | 0 | 0 |
| 1774117819 | 0 | 139 | 0 | 13 | 0 |
| 1774117219 | 0 | 545 | 0 | 27 | 0 |
| 1774116619 | 0 | 191 | 0 | 18 | 0 |
| 1774116019 | 0 | 747 | 0 | 48 | 0 |
| 1774115419 | 0 | 722 | 0 | 42 | 0 |
| 1774114821 | 0 | 434 | 0 | 16 | 0 |
| 1774114219 | 0 | 22 | 0 | 4 | 0 |
| 1774113619 | 0 | 0 | 0 | 0 | 0 |
| 1774113019 | 0 | 10 | 0 | 2 | 0 |
| 1774112420 | 0 | 43 | 0 | 8 | 0 |
| 1774111936 | 0 | 15 | 1 | 3 | 0 |
| 1774111219 | 0 | 10 | 0 | 2 | 0 |
| 1774110619 | 0 | 0 | 0 | 0 | 0 |
| 1774110019 | 0 | 80 | 0 | 14 | 0 |
| 1774109419 | 0 | 442 | 0 | 18 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)