This is the latest recevied telemetry packets stored in our database for station/object E20YXF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1836274417 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 35 % |
| 1836274289 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 14 % |
| 1762262555 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 1 % |
| 1762261933 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 1 % |
| 1762261311 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 1 % |
| 1762260689 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 1 % |
| 1762260067 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 1 % |
| 1762259445 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 1 % |
| 1762258823 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 1 % |
| 1762258201 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 1 % |
| 1762257579 | 0 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 1 % |
| 1762256957 | 0 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 1 % |
| 1762256335 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 1 % |
| 1762255713 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 1 % |
| 1762255091 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 1 % |
| 1762254469 | 0 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 1 % |
| 1762253847 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 1 % |
| 1762253225 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 1 % |
| 1762252603 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 1 % |
| 1762251981 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 1 % |
| 1762251359 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 2 % |
| 1762250737 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 2 % |
| 1762250115 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 2 % |
| 1762249493 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 3 % |
| 1762248871 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 8 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)