This is the latest recevied telemetry packets stored in our database for station/object YO9RIJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | T ext.* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770177567 | 3 °C | 0 | 0 | 0 | 0 |
| 1770176969 | 3 °C | 0 | 0 | 0 | 0 |
| 1770176370 | 2.9 °C | 0 | 0 | 0 | 0 |
| 1770175770 | 2.8 °C | 0 | 0 | 0 | 0 |
| 1770175170 | 2.9 °C | 0 | 0 | 0 | 0 |
| 1770174570 | 2.9 °C | 0 | 0 | 0 | 0 |
| 1770173970 | 2.9 °C | 0 | 0 | 0 | 0 |
| 1770173367 | 2.9 °C | 0 | 0 | 0 | 0 |
| 1770172770 | 2.9 °C | 0 | 0 | 0 | 0 |
| 1770172168 | 3.1 °C | 0 | 0 | 0 | 0 |
| 1770171569 | 3.2 °C | 0 | 0 | 0 | 0 |
| 1770170969 | 3.2 °C | 0 | 0 | 0 | 0 |
| 1770170369 | 3.1 °C | 0 | 0 | 0 | 0 |
| 1770169769 | 3.1 °C | 0 | 0 | 0 | 0 |
| 1770169170 | 3.1 °C | 0 | 0 | 0 | 0 |
| 1770168569 | 3 °C | 0 | 0 | 0 | 0 |
| 1770167970 | 3.1 °C | 0 | 0 | 0 | 0 |
| 1770167370 | 3.2 °C | 0 | 0 | 0 | 0 |
| 1770166770 | 3.1 °C | 0 | 0 | 0 | 0 |
| 1770166204 | 3.1 °C | 0 | 0 | 0 | 0 |
| 1770165569 | 3.2 °C | 0 | 0 | 0 | 0 |
| 1770165036 | 3.3 °C | 0 | 0 | 0 | 0 |
| 1770164369 | 3.3 °C | 0 | 0 | 0 | 0 |
| 1770163769 | 3.4 °C | 0 | 0 | 0 | 0 |
| 1770163169 | 3.6 °C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
T ext.: 0, 1, -100
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)