APRS Track Direct

My position About ☰

reset

N9PBD-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N9PBD-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx10m*	Dg1h*	Eff1h*	Temp*
1750145424	14.1 Volt	48 Pkt	120 Pkt	83 Pcnt	-64 C
1750141822	13.13 Volt	41 Pkt	140 Pkt	73 Pcnt	-64 C
1750138220	14.1 Volt	50 Pkt	160 Pkt	83 Pcnt	-64 C
1750134616	14.1 Volt	53 Pkt	140 Pkt	84 Pcnt	-64 C
1750131010	14.1 Volt	44 Pkt	120 Pkt	79 Pcnt	-64 C
1750127406	14.03 Volt	52 Pkt	140 Pkt	82 Pcnt	-64 C
1750123803	14.03 Volt	41 Pkt	130 Pkt	74 Pcnt	-64 C
1750120199	14.03 Volt	44 Pkt	140 Pkt	76 Pcnt	-64 C
1750116596	14.03 Volt	55 Pkt	180 Pkt	80 Pcnt	-64 C
1750112993	14.03 Volt	38 Pkt	130 Pkt	58 Pcnt	-64 C
1750109390	14.03 Volt	34 Pkt	100 Pkt	61 Pcnt	-64 C
1750105787	14.03 Volt	27 Pkt	100 Pkt	48 Pcnt	-64 C
1750102183	14.1 Volt	27 Pkt	100 Pkt	52 Pcnt	-64 C
1750098579	14.1 Volt	35 Pkt	100 Pkt	63 Pcnt	-64 C
1750094976	14.1 Volt	40 Pkt	110 Pkt	84 Pcnt	-64 C
1750091372	13.8 Volt	41 Pkt	110 Pkt	72 Pcnt	-64 C
1750087770	14.1 Volt	60 Pkt	130 Pkt	86 Pcnt	-64 C
1750084165	14.1 Volt	50 Pkt	120 Pkt	79 Pcnt	-64 C
1750080562	14.1 Volt	57 Pkt	140 Pkt	79 Pcnt	-64 C
1750076958	14.1 Volt	56 Pkt	160 Pkt	80 Pcnt	-64 C
1750073354	14.1 Volt	51 Pkt	160 Pkt	72 Pcnt	-64 C
1750069752	14.1 Volt	41 Pkt	120 Pkt	70 Pcnt	-64 C
1750066147	14.1 Volt	44 Pkt	140 Pkt	74 Pcnt	-64 C
1750062544	14.1 Volt	45 Pkt	130 Pkt	78 Pcnt	-64 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10m: 0, 1, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)