APRS Track Direct

My position About ☰

reset

HP1CDW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1CDW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	EffTo*
1743792393	14.38 Volt	320 Pkt	150 Pkt	58 Pcnt	60 Pcnt
1743791793	14.38 Volt	340 Pkt	150 Pkt	58 Pcnt	60 Pcnt
1743791193	14.38 Volt	330 Pkt	140 Pkt	57 Pcnt	60 Pcnt
1743790595	14.38 Volt	320 Pkt	150 Pkt	57 Pcnt	60 Pcnt
1743789993	14.38 Volt	340 Pkt	150 Pkt	55 Pcnt	60 Pcnt
1743789393	14.38 Volt	320 Pkt	150 Pkt	54 Pcnt	60 Pcnt
1743788793	14.38 Volt	280 Pkt	140 Pkt	54 Pcnt	60 Pcnt
1743788194	14.38 Volt	290 Pkt	140 Pkt	54 Pcnt	60 Pcnt
1743787593	14.38 Volt	300 Pkt	140 Pkt	56 Pcnt	60 Pcnt
1743786993	14.38 Volt	300 Pkt	130 Pkt	57 Pcnt	60 Pcnt
1743786397	14.38 Volt	290 Pkt	130 Pkt	62 Pcnt	60 Pcnt
1743785793	14.38 Volt	300 Pkt	130 Pkt	64 Pcnt	60 Pcnt
1743785193	14.38 Volt	300 Pkt	130 Pkt	64 Pcnt	60 Pcnt
1743784593	14.3 Volt	270 Pkt	120 Pkt	64 Pcnt	60 Pcnt
1743783993	14.38 Volt	270 Pkt	120 Pkt	62 Pcnt	60 Pcnt
1743783394	14.38 Volt	240 Pkt	110 Pkt	59 Pcnt	60 Pcnt
1743782794	14.22 Volt	250 Pkt	120 Pkt	57 Pcnt	60 Pcnt
1743782193	14.38 Volt	250 Pkt	140 Pkt	54 Pcnt	60 Pcnt
1743781593	14.38 Volt	270 Pkt	150 Pkt	55 Pcnt	60 Pcnt
1743780994	14.38 Volt	280 Pkt	150 Pkt	57 Pcnt	60 Pcnt
1743780393	14.38 Volt	290 Pkt	150 Pkt	57 Pcnt	60 Pcnt
1743779793	14.38 Volt	280 Pkt	150 Pkt	59 Pcnt	60 Pcnt
1743779193	14.38 Volt	300 Pkt	140 Pkt	61 Pcnt	60 Pcnt
1743778593	14.38 Volt	290 Pkt	120 Pkt	61 Pcnt	60 Pcnt
1743777993	14.38 Volt	280 Pkt	110 Pkt	62 Pcnt	60 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTo: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)