This is the latest recevied telemetry packets stored in our database for station/object DH1BBK-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1758196894 | 1018.2 hPa | 18.7 C deg | 74.2 % | 1020.6 hPa | 0 C deg |
| 1758195094 | 1018 hPa | 18.7 C deg | 73.8 % | 1020.5 hPa | 0 C deg |
| 1758193293 | 1017.9 hPa | 18.7 C deg | 73.6 % | 1020.4 hPa | 0 C deg |
| 1758191493 | 1017.8 hPa | 18.7 C deg | 73.7 % | 1020.3 hPa | 0 C deg |
| 1758189693 | 1017.6 hPa | 18.7 C deg | 74.1 % | 1020.1 hPa | 0 C deg |
| 1758187893 | 1017.5 hPa | 18.6 C deg | 74.2 % | 1020 hPa | 0 C deg |
| 1758186093 | 1017.5 hPa | 18.5 C deg | 74.4 % | 1020 hPa | 0 C deg |
| 1758184293 | 1017.3 hPa | 18.3 C deg | 75.3 % | 1019.8 hPa | 0 C deg |
| 1758182493 | 1017 hPa | 18.2 C deg | 76.3 % | 1019.5 hPa | 0 C deg |
| 1758180693 | 1016.8 hPa | 18.1 C deg | 75.6 % | 1019.3 hPa | 0 C deg |
| 1758178893 | 1016.6 hPa | 18 C deg | 73.5 % | 1019.1 hPa | 0 C deg |
| 1758177093 | 1016.3 hPa | 18 C deg | 70.2 % | 1018.8 hPa | 0 C deg |
| 1758175293 | 1016.1 hPa | 18 C deg | 70 % | 1018.6 hPa | 0 C deg |
| 1758173493 | 1016 hPa | 18 C deg | 69.9 % | 1018.5 hPa | 0 C deg |
| 1758171693 | 1015.8 hPa | 18 C deg | 69.8 % | 1018.3 hPa | 0 C deg |
| 1758137491 | 1017.9 hPa | 18.5 C deg | 69.3 % | 1020.4 hPa | 0 C deg |
| 1758135691 | 1017.9 hPa | 18.5 C deg | 69.2 % | 1020.4 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)