This is the latest recevied telemetry packets stored in our database for station/object DD3FC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1790648707 | 9.9 Volt | 240 Pkt | 60 Pkt | 90 Pcnt | 0 None |
| 1790648108 | 9.9 Volt | 240 Pkt | 60 Pkt | 87 Pcnt | 0 None |
| 1790647509 | 9.9 Volt | 240 Pkt | 60 Pkt | 87 Pcnt | 0 None |
| 1790647507 | 9.9 Volt | 240 Pkt | 60 Pkt | 87 Pcnt | 0 None |
| 1790646910 | 9.9 Volt | 240 Pkt | 60 Pkt | 89 Pcnt | 0 None |
| 1790646908 | 9.9 Volt | 240 Pkt | 60 Pkt | 89 Pcnt | 0 None |
| 1790646308 | 9.9 Volt | 240 Pkt | 60 Pkt | 89 Pcnt | 0 None |
| 1790645709 | 9.9 Volt | 240 Pkt | 60 Pkt | 90 Pcnt | 0 None |
| 1790645708 | 9.9 Volt | 240 Pkt | 60 Pkt | 90 Pcnt | 0 None |
| 1790645110 | 9.9 Volt | 240 Pkt | 70 Pkt | 92 Pcnt | 0 None |
| 1790645108 | 9.9 Volt | 240 Pkt | 70 Pkt | 92 Pcnt | 0 None |
| 1790644508 | 9.9 Volt | 250 Pkt | 70 Pkt | 92 Pcnt | 0 None |
| 1790643910 | 9.9 Volt | 260 Pkt | 70 Pkt | 93 Pcnt | 0 None |
| 1790643908 | 9.9 Volt | 260 Pkt | 70 Pkt | 93 Pcnt | 0 None |
| 1790643308 | 9.9 Volt | 260 Pkt | 60 Pkt | 94 Pcnt | 0 None |
| 1790642708 | 9.9 Volt | 270 Pkt | 60 Pkt | 94 Pcnt | 0 None |
| 1790642108 | 9.9 Volt | 270 Pkt | 60 Pkt | 94 Pcnt | 0 None |
| 1790641508 | 9.9 Volt | 260 Pkt | 60 Pkt | 95 Pcnt | 0 None |
| 1790640908 | 9.9 Volt | 260 Pkt | 60 Pkt | 95 Pcnt | 0 None |
| 1790640310 | 9.9 Volt | 250 Pkt | 50 Pkt | 95 Pcnt | 0 None |
| 1790640308 | 9.9 Volt | 250 Pkt | 50 Pkt | 95 Pcnt | 0 None |
| 1790639708 | 9.9 Volt | 260 Pkt | 50 Pkt | 95 Pcnt | 0 None |
| 1790639108 | 9.9 Volt | 250 Pkt | 50 Pkt | 96 Pcnt | 0 None |
| 1790638508 | 9.9 Volt | 250 Pkt | 60 Pkt | 96 Pcnt | 0 None |
| 1790637908 | 9.9 Volt | 250 Pkt | 60 Pkt | 97 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)