This is the latest recevied telemetry packets stored in our database for station/object DG1NJ-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1750172235 | 997.9 hPa | 25.7 C deg | 39.4 % | 1030.2 hPa | 0 C deg |
| 1750170435 | 998.1 hPa | 25.2 C deg | 39.4 % | 1030.4 hPa | 0 C deg |
| 1750168635 | 998.4 hPa | 24.1 C deg | 41.5 % | 1030.9 hPa | 0 C deg |
| 1750166835 | 998.6 hPa | 24.2 C deg | 41.5 % | 1031.1 hPa | 0 C deg |
| 1750165035 | 998.7 hPa | 24.3 C deg | 41.2 % | 1031.2 hPa | 0 C deg |
| 1750163235 | 999 hPa | 24.4 C deg | 41.4 % | 1031.5 hPa | 0 C deg |
| 1750161434 | 999.3 hPa | 24.4 C deg | 42.9 % | 1031.8 hPa | 0 C deg |
| 1750159634 | 999.7 hPa | 24.5 C deg | 43.1 % | 1032.2 hPa | 0 C deg |
| 1750157834 | 999.8 hPa | 24.7 C deg | 41.5 % | 1032.3 hPa | 0 C deg |
| 1750156034 | 1000.1 hPa | 24.8 C deg | 41.8 % | 1032.6 hPa | 0 C deg |
| 1750154234 | 1000.2 hPa | 25 C deg | 41.5 % | 1032.6 hPa | 0 C deg |
| 1750152655 | 1000.3 hPa | 25.8 C deg | 40.1 % | 1032.7 hPa | 0 C deg |
| 1750150855 | 1000.3 hPa | 25.3 C deg | 41.9 % | 1032.8 hPa | 0 C deg |
| 1750149055 | 1000.5 hPa | 24.6 C deg | 44.1 % | 1033 hPa | 0 C deg |
| 1750147255 | 1000.5 hPa | 23.3 C deg | 46.6 % | 1033.2 hPa | 0 C deg |
| 1750091017 | 999.4 hPa | 26.9 C deg | 41.8 % | 1031.6 hPa | 0 C deg |
| 1750089217 | 999.4 hPa | 26.7 C deg | 42.6 % | 1031.7 hPa | 0 C deg |
| 1750087417 | 999.7 hPa | 26 C deg | 43.6 % | 1032 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)