APRS Track Direct

My position About ☰

reset

S56RAL-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S56RAL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	T (E)*	Eff1h*
1750119779	13.43 Volt	320 Pkt	21.5 °C	71 Pcnt
1750119778	13.43 Volt	320 Pkt	21.5 °C	71 Pcnt
1750119478	13.43 Volt	310 Pkt	22 °C	70 Pcnt
1750119179	13.43 Volt	290 Pkt	21.5 °C	67 Pcnt
1750119178	13.43 Volt	290 Pkt	21.5 °C	67 Pcnt
1750118880	13.43 Volt	290 Pkt	21 °C	67 Pcnt
1750118878	13.43 Volt	290 Pkt	21 °C	67 Pcnt
1750118578	13.43 Volt	260 Pkt	21.5 °C	65 Pcnt
1750118278	13.43 Volt	260 Pkt	21.5 °C	63 Pcnt
1750117978	13.43 Volt	250 Pkt	21.5 °C	61 Pcnt
1750117678	13.43 Volt	240 Pkt	21.5 °C	60 Pcnt
1750117381	13.43 Volt	230 Pkt	21 °C	60 Pcnt
1750117378	13.43 Volt	230 Pkt	21 °C	60 Pcnt
1750117079	13.43 Volt	220 Pkt	21.5 °C	59 Pcnt
1750117078	13.43 Volt	220 Pkt	21.5 °C	59 Pcnt
1750116778	13.43 Volt	220 Pkt	21.5 °C	59 Pcnt
1750116481	13.43 Volt	220 Pkt	21.5 °C	60 Pcnt
1750116478	13.43 Volt	220 Pkt	21.5 °C	60 Pcnt
1750116179	13.43 Volt	220 Pkt	21.5 °C	59 Pcnt
1750116178	13.43 Volt	220 Pkt	21.5 °C	59 Pcnt
1750115878	13.43 Volt	230 Pkt	21.5 °C	62 Pcnt
1750115586	13.43 Volt	250 Pkt	22 °C	63 Pcnt
1750115578	13.43 Volt	250 Pkt	22 °C	63 Pcnt
1750115280	13.43 Volt	270 Pkt	22 °C	66 Pcnt
1750115278	13.43 Volt	270 Pkt	22 °C	66 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

T (E): 0, 0.5, -64

Eff1h: 0, 1, 0

T (M): 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)