APRS Track Direct

My position About ☰

reset

W0KJH-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W0KJH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V_Batt*	RX_rate*	RelRate*	DrpRate*
1790667531	4.33 VDC	240 pkt/h	12 pkt/h	96 pkt/h
1790666630	4.27 VDC	232 pkt/h	16 pkt/h	108 pkt/h
1790665730	4.24 VDC	308 pkt/h	8 pkt/h	136 pkt/h
1790664829	4.27 VDC	380 pkt/h	12 pkt/h	184 pkt/h
1790663929	4.33 VDC	352 pkt/h	12 pkt/h	156 pkt/h
1790663028	4.28 VDC	392 pkt/h	20 pkt/h	172 pkt/h
1790662128	4.26 VDC	248 pkt/h	4 pkt/h	120 pkt/h
1790661228	4.31 VDC	264 pkt/h	12 pkt/h	124 pkt/h
1790660328	4.28 VDC	352 pkt/h	16 pkt/h	148 pkt/h
1790659427	4.27 VDC	468 pkt/h	12 pkt/h	204 pkt/h
1790658527	4.32 VDC	312 pkt/h	12 pkt/h	128 pkt/h
1790657627	4.31 VDC	419 pkt/h	12 pkt/h	176 pkt/h
1790656726	4.25 VDC	128 pkt/h	8 pkt/h	32 pkt/h
1790655825	4.27 VDC	340 pkt/h	16 pkt/h	156 pkt/h
1790654925	4.26 VDC	212 pkt/h	8 pkt/h	96 pkt/h
1790654024	4.29 VDC	324 pkt/h	12 pkt/h	172 pkt/h
1790653124	4.27 VDC	336 pkt/h	20 pkt/h	136 pkt/h
1790652224	4.3 VDC	344 pkt/h	12 pkt/h	148 pkt/h
1790651323	4.28 VDC	252 pkt/h	16 pkt/h	104 pkt/h
1790650422	4.32 VDC	252 pkt/h	12 pkt/h	120 pkt/h
1790649521	4.26 VDC	312 pkt/h	4 pkt/h	184 pkt/h
1790648621	4.31 VDC	348 pkt/h	8 pkt/h	196 pkt/h
1790647721	4.25 VDC	264 pkt/h	8 pkt/h	152 pkt/h
1790646820	4.29 VDC	436 pkt/h	12 pkt/h	252 pkt/h
1790645920	4.28 VDC	288 pkt/h	16 pkt/h	116 pkt/h

*Used Equation Coefficients:

V_Batt: 0, 0.01, 0

RX_rate: 0, 1, 0

RelRate: 0, 1, 0

DrpRate: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)