APRS Track Direct

My position About ☰

reset

DF8RD-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF8RD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	QNH*	Temp.out*
1758213154	970.3 hPa	35.2 C deg	1026.9 hPa	0 C deg
1758211353	970.2 hPa	35.3 C deg	1026.8 hPa	0 C deg
1758209553	970.2 hPa	35.3 C deg	1026.8 hPa	0 C deg
1758207753	970.1 hPa	35.1 C deg	1026.7 hPa	0 C deg
1758204152	970.1 hPa	35.2 C deg	1026.8 hPa	0 C deg
1758202352	970.2 hPa	35.1 C deg	1026.8 hPa	0 C deg
1758200552	970.3 hPa	35.2 C deg	1026.9 hPa	0 C deg
1758198752	970.5 hPa	35.1 C deg	1027.1 hPa	0 C deg
1758196952	970.6 hPa	35 C deg	1027.3 hPa	0 C deg
1758195152	970.8 hPa	34.8 C deg	1027.5 hPa	0 C deg
1758193352	970.8 hPa	34.4 C deg	1027.6 hPa	0 C deg
1758191552	971 hPa	33.8 C deg	1028 hPa	0 C deg
1758189752	971.1 hPa	34 C deg	1028 hPa	0 C deg
1758187951	971.3 hPa	33.6 C deg	1028.2 hPa	0 C deg
1758186151	971.3 hPa	32.8 C deg	1028.4 hPa	0 C deg
1758184351	971.3 hPa	32.5 C deg	1028.5 hPa	0 C deg
1758182551	971.2 hPa	32.3 C deg	1028.4 hPa	0 C deg
1758180751	971.2 hPa	32.9 C deg	1028.3 hPa	0 C deg
1758178951	970.8 hPa	32.2 C deg	1028 hPa	0 C deg
1758177151	970.8 hPa	31.9 C deg	1028 hPa	0 C deg
1758175351	970.6 hPa	31.5 C deg	1028 hPa	0 C deg
1758173551	970.6 hPa	31.4 C deg	1028 hPa	0 C deg
1758171751	970.5 hPa	31.3 C deg	1027.9 hPa	0 C deg
1758137549	970.5 hPa	37 C deg	1026.8 hPa	0 C deg
1758135749	970.4 hPa	37.6 C deg	1026.6 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)