APRS Track Direct

My position About ☰

reset

IQ3UD-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ3UD-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff1h*
1836274678	163 Pkt	980 Pkt	0.03 Pcnt	59 Pcnt
1836274528	134 Pkt	980 Pkt	0.03 Pcnt	59 Pcnt
1836274377	156 Pkt	990 Pkt	0.03 Pcnt	58 Pcnt
1836274228	150 Pkt	980 Pkt	0.03 Pcnt	59 Pcnt
1836274077	165 Pkt	990 Pkt	0.03 Pcnt	58 Pcnt
1782520016	115 Pkt	760 Pkt	0.08 Pcnt	68 Pcnt
1782519716	108 Pkt	750 Pkt	0.08 Pcnt	67 Pcnt
1782519416	128 Pkt	750 Pkt	0.08 Pcnt	68 Pcnt
1782519115	115 Pkt	740 Pkt	0.08 Pcnt	67 Pcnt
1782518815	118 Pkt	730 Pkt	0.08 Pcnt	67 Pcnt
1782518515	124 Pkt	730 Pkt	0.08 Pcnt	67 Pcnt
1782518214	101 Pkt	720 Pkt	0.08 Pcnt	67 Pcnt
1782517914	106 Pkt	730 Pkt	0.08 Pcnt	68 Pcnt
1782517614	113 Pkt	740 Pkt	0.08 Pcnt	69 Pcnt
1782517314	124 Pkt	720 Pkt	0.08 Pcnt	68 Pcnt
1782517013	139 Pkt	730 Pkt	0.08 Pcnt	69 Pcnt
1782516713	120 Pkt	700 Pkt	0.08 Pcnt	69 Pcnt
1782516413	91 Pkt	690 Pkt	0.08 Pcnt	69 Pcnt
1782516112	104 Pkt	690 Pkt	0.08 Pcnt	69 Pcnt
1782515812	118 Pkt	700 Pkt	0.08 Pcnt	69 Pcnt
1782515512	99 Pkt	690 Pkt	0.08 Pcnt	70 Pcnt
1782515211	107 Pkt	690 Pkt	0.08 Pcnt	70 Pcnt
1782514911	123 Pkt	700 Pkt	0.08 Pcnt	70 Pcnt
1782514611	115 Pkt	690 Pkt	0.08 Pcnt	70 Pcnt
1782514311	98 Pkt	690 Pkt	0.08 Pcnt	69 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)