This is the latest recevied telemetry packets stored in our database for station/object HS8JUK-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1836274549 | 0 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 0 % |
| 1836274411 | 0 Pkt | 0 Pkt | 0 Pkt | -21 dBm | 0 % |
| 1836273937 | 0 Pkt | 0 Pkt | 0 Pkt | -21 dBm | 0 % |
| 1782563221 | 0 Pkt | 0 Pkt | 0 Pkt | -24 dBm | 0 % |
| 1782562609 | 0 Pkt | 0 Pkt | 0 Pkt | -19 dBm | 0 % |
| 1782561998 | 0 Pkt | 0 Pkt | 0 Pkt | -21 dBm | 0 % |
| 1782561386 | 0 Pkt | 0 Pkt | 0 Pkt | -25 dBm | 0 % |
| 1782560774 | 0 Pkt | 0 Pkt | 0 Pkt | -18 dBm | 0 % |
| 1782560163 | 0 Pkt | 0 Pkt | 0 Pkt | -20 dBm | 0 % |
| 1782559551 | 0 Pkt | 0 Pkt | 0 Pkt | -17 dBm | 0 % |
| 1782558939 | 0 Pkt | 0 Pkt | 0 Pkt | -25 dBm | 0 % |
| 1782558328 | 0 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 0 % |
| 1782557716 | 0 Pkt | 0 Pkt | 0 Pkt | -18 dBm | 0 % |
| 1782557104 | 0 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 0 % |
| 1782556493 | 0 Pkt | 0 Pkt | 0 Pkt | -18 dBm | 0 % |
| 1782555881 | 0 Pkt | 0 Pkt | 0 Pkt | -20 dBm | 0 % |
| 1782555269 | 0 Pkt | 0 Pkt | 0 Pkt | -18 dBm | 0 % |
| 1782554658 | 0 Pkt | 0 Pkt | 0 Pkt | -18 dBm | 0 % |
| 1782554046 | 0 Pkt | 0 Pkt | 0 Pkt | -18 dBm | 0 % |
| 1782553435 | 0 Pkt | 0 Pkt | 0 Pkt | -16 dBm | 0 % |
| 1782552823 | 0 Pkt | 0 Pkt | 0 Pkt | -21 dBm | 0 % |
| 1782552211 | 0 Pkt | 0 Pkt | 0 Pkt | -20 dBm | 0 % |
| 1782551600 | 0 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 0 % |
| 1782550988 | 0 Pkt | 0 Pkt | 0 Pkt | -18 dBm | 0 % |
| 1782550376 | 0 Pkt | 0 Pkt | 0 Pkt | -28 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)