APRS Track Direct

My position About ☰

reset

SR5POT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5POT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU Temp*	CPU Usage*	PA Temp*	PS Temp*
1753891804	3 Deg.C	2 %	28.8 Deg.C	24.9 Deg.C
1753891207	3 Deg.C	2 %	29 Deg.C	25 Deg.C
1753890604	3 Deg.C	2 %	29 Deg.C	26.3 Deg.C
1753890006	4 Deg.C	2 %	29.3 Deg.C	25 Deg.C
1753889404	3 Deg.C	2 %	29 Deg.C	25 Deg.C
1753888804	5 Deg.C	2 %	29.1 Deg.C	25.3 Deg.C
1753888207	5 Deg.C	2 %	29.3 Deg.C	25.8 Deg.C
1753887604	5 Deg.C	2 %	29.3 Deg.C	25.9 Deg.C
1753887007	5 Deg.C	2 %	29.7 Deg.C	27 Deg.C
1753886404	5 Deg.C	2 %	29.6 Deg.C	26.5 Deg.C
1753885807	6 Deg.C	2 %	29.5 Deg.C	30.8 Deg.C
1753885204	6 Deg.C	2 %	29.9 Deg.C	27 Deg.C
1753884604	6 Deg.C	2 %	29.5 Deg.C	33.5 Deg.C
1753884007	5 Deg.C	2 %	29.5 Deg.C	29.4 Deg.C
1753883403	4 Deg.C	2 %	29.1 Deg.C	30 Deg.C
1753882807	3 Deg.C	2 %	28.6 Deg.C	27.4 Deg.C
1753882204	4 Deg.C	2 %	28.6 Deg.C	25.2 Deg.C
1753881607	5 Deg.C	2 %	29.3 Deg.C	26.2 Deg.C
1753881013	4 Deg.C	3 %	28.8 Deg.C	28.5 Deg.C
1753880403	3 Deg.C	2 %	28.2 Deg.C	25.3 Deg.C
1753879806	3 Deg.C	3 %	28.3 Deg.C	26 Deg.C
1753879204	3 Deg.C	3 %	28.3 Deg.C	25.1 Deg.C
1753878607	4 Deg.C	3 %	28.6 Deg.C	25 Deg.C
1753878004	4 Deg.C	3 %	28.3 Deg.C	24.9 Deg.C
1753877407	5 Deg.C	3 %	28.8 Deg.C	25.6 Deg.C

*Used Equation Coefficients:

CPU Temp: 0, 0.1, 0

CPU Usage: 0, 1, 0

PA Temp: 0, 0.1, 0

PS Temp: 0, 0.1, 0

Value5: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)