APRS Track Direct

My position About ☰

reset

9A2RI-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A2RI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790657752	14.3 Volt	1100 Pkt	310 Pkt	68 Pcnt
1790656849	14.3 Volt	1110 Pkt	300 Pkt	69 Pcnt
1790655953	14.3 Volt	1130 Pkt	340 Pkt	69 Pcnt
1790655050	14.3 Volt	1210 Pkt	390 Pkt	69 Pcnt
1790654145	14.3 Volt	1300 Pkt	410 Pkt	71 Pcnt
1790653245	14.3 Volt	1320 Pkt	410 Pkt	70 Pcnt
1790652344	14.3 Volt	1340 Pkt	400 Pkt	70 Pcnt
1790651448	14.3 Volt	1260 Pkt	360 Pkt	69 Pcnt
1790650547	14.3 Volt	1170 Pkt	320 Pkt	67 Pcnt
1790649645	14.3 Volt	1180 Pkt	330 Pkt	68 Pcnt
1790648741	14.3 Volt	1160 Pkt	320 Pkt	67 Pcnt
1790647840	14.3 Volt	1170 Pkt	310 Pkt	67 Pcnt
1790646939	14.3 Volt	1210 Pkt	300 Pkt	69 Pcnt
1790646040	14.3 Volt	1190 Pkt	310 Pkt	70 Pcnt
1790645138	14.3 Volt	1200 Pkt	320 Pkt	69 Pcnt
1790644236	14.3 Volt	1210 Pkt	330 Pkt	68 Pcnt
1790643336	14.3 Volt	1180 Pkt	340 Pkt	64 Pcnt
1790642439	14.3 Volt	1220 Pkt	360 Pkt	65 Pcnt
1790641534	14.3 Volt	1260 Pkt	380 Pkt	67 Pcnt
1790640636	14.3 Volt	1310 Pkt	390 Pkt	68 Pcnt
1790639735	14.38 Volt	1400 Pkt	410 Pkt	70 Pcnt
1790638837	14.3 Volt	1400 Pkt	370 Pkt	70 Pcnt
1790637930	14.3 Volt	1410 Pkt	350 Pkt	72 Pcnt
1790637033	14.3 Volt	1410 Pkt	340 Pkt	74 Pcnt
1790636133	14.3 Volt	1380 Pkt	320 Pkt	75 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)