APRS Track Direct

My position About ☰

reset

YO8KGA-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO8KGA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Voltage*	Rx per 10 mins*	TX per 10 mins*	Temperature*
1732292316	13.24 V	14 count/10m	0 count/10m	12.38 C
1732291710	13.23 V	14 count/10m	3 count/10m	12.25 C
1732291104	13.23 V	11 count/10m	0 count/10m	12.38 C
1732290498	13.23 V	17 count/10m	0 count/10m	12.25 C
1732289892	13.24 V	17 count/10m	2 count/10m	12.25 C
1732289286	13.23 V	11 count/10m	2 count/10m	12.38 C
1732288680	13.23 V	10 count/10m	1 count/10m	12.25 C
1732288074	13.23 V	17 count/10m	2 count/10m	12.25 C
1732287468	13.24 V	16 count/10m	1 count/10m	12.25 C
1732286862	13.23 V	13 count/10m	0 count/10m	12.25 C
1732286256	13.23 V	14 count/10m	3 count/10m	12.25 C
1732285650	13.22 V	12 count/10m	1 count/10m	12.25 C
1732285044	13.22 V	8 count/10m	0 count/10m	12.25 C
1732284438	13.25 V	16 count/10m	4 count/10m	12.25 C
1732283832	13.23 V	24 count/10m	2 count/10m	12.13 C
1732283226	13.23 V	17 count/10m	0 count/10m	12.13 C
1732282620	13.22 V	16 count/10m	3 count/10m	12.13 C
1732282014	13.23 V	12 count/10m	1 count/10m	12.13 C
1732281408	13.23 V	20 count/10m	0 count/10m	12 C
1732280802	13.23 V	24 count/10m	5 count/10m	12 C
1732280196	13.22 V	28 count/10m	1 count/10m	12 C
1732279590	13.23 V	24 count/10m	0 count/10m	12 C
1732278984	13.24 V	26 count/10m	3 count/10m	12 C
1732278378	13.22 V	26 count/10m	1 count/10m	12 C
1732277772	13.23 V	25 count/10m	0 count/10m	12 C

*Used Equation Coefficients:

Voltage: 0, 0.008, 0

Rx per 10 mins: 0, 1, 0

TX per 10 mins: 0, 1, 0

Temperature: 0, 0.125, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)