APRS Track Direct

My position About ☰

reset

LZ0VRC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0VRC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humi*	Presaure*	Power*
1758216401	18.6 C	33.51 %RH	984 hPa	5.64 V
1758216397	18.6 C	33.51 %RH	984 hPa	5.64 V
1758216097	18.62 C	33.42 %RH	984 hPa	5.61 V
1758215801	18.72 C	33.25 %RH	984 hPa	5.65 V
1758215797	18.72 C	33.25 %RH	984 hPa	5.65 V
1758215497	18.76 C	32.99 %RH	984 hPa	5.61 V
1758215201	18.82 C	32.89 %RH	984 hPa	5.68 V
1758215197	18.81 C	32.89 %RH	984 hPa	5.66 V
1758214897	18.85 C	33.16 %RH	984 hPa	5.64 V
1758214601	18.9 C	32.92 %RH	984 hPa	5.68 V
1758214597	18.92 C	32.77 %RH	984 hPa	5.67 V
1758214297	19.03 C	32.39 %RH	984 hPa	5.65 V
1758214001	19.04 C	32.65 %RH	983 hPa	5.66 V
1758213997	19.04 C	32.65 %RH	983 hPa	5.66 V
1758213697	19.15 C	32.61 %RH	983 hPa	5.6 V
1758213401	19.3 C	32.14 %RH	983 hPa	5.68 V
1758213397	19.3 C	32.14 %RH	983 hPa	5.68 V
1758213097	19.42 C	31.86 %RH	983 hPa	5.66 V
1758212801	19.6 C	31.45 %RH	983 hPa	5.62 V
1758212797	19.6 C	31.51 %RH	983 hPa	5.62 V
1758212497	19.71 C	31.35 %RH	983 hPa	5.63 V
1758212201	19.81 C	31.04 %RH	983 hPa	5.64 V
1758212197	19.81 C	31.04 %RH	983 hPa	5.61 V
1758211897	20.05 C	31.22 %RH	983 hPa	5.61 V
1758211601	20.2 C	30.38 %RH	983 hPa	5.61 V

*Used Equation Coefficients:

Temp: 0, 0.01, 0

Humi: 0, 0.01, 0

Presaure: 0, 1, 0

Power: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)