APRS Track Direct

My position About ☰

reset

TB3BWI-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TB3BWI-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1836274443	7 Pkt	6 Pkt	19 Pkt	-61 dBm	13.37 V
1762293727	15 Pkt	14 Pkt	39 Pkt	-68 dBm	13.84 V
1762292788	18 Pkt	7 Pkt	45 Pkt	-59 dBm	13.84 V
1762291856	13 Pkt	8 Pkt	42 Pkt	-64 dBm	13.84 V
1762290924	11 Pkt	12 Pkt	66 Pkt	-60 dBm	13.84 V
1762289989	11 Pkt	10 Pkt	51 Pkt	-66 dBm	13.86 V
1762289052	10 Pkt	9 Pkt	44 Pkt	-68 dBm	13.84 V
1762288118	12 Pkt	6 Pkt	35 Pkt	-70 dBm	13.86 V
1762287188	18 Pkt	9 Pkt	45 Pkt	-61 dBm	13.84 V
1762286253	16 Pkt	7 Pkt	45 Pkt	-63 dBm	13.84 V
1762285320	18 Pkt	11 Pkt	58 Pkt	-60 dBm	13.84 V
1762284383	11 Pkt	6 Pkt	73 Pkt	-63 dBm	13.84 V
1762283450	12 Pkt	9 Pkt	86 Pkt	-60 dBm	13.84 V
1762282515	11 Pkt	4 Pkt	98 Pkt	-67 dBm	13.84 V
1762281585	15 Pkt	6 Pkt	85 Pkt	-67 dBm	13.86 V
1762280654	11 Pkt	8 Pkt	99 Pkt	-60 dBm	13.84 V
1762279720	10 Pkt	10 Pkt	106 Pkt	-66 dBm	13.84 V
1762278785	12 Pkt	20 Pkt	108 Pkt	-60 dBm	13.84 V
1762277850	12 Pkt	14 Pkt	90 Pkt	-59 dBm	13.84 V
1762277837	5 Pkt	12 Pkt	111 Pkt	-67 dBm	13.86 V
1762276901	12 Pkt	14 Pkt	90 Pkt	-59 dBm	13.84 V
1762275959	15 Pkt	9 Pkt	95 Pkt	-61 dBm	13.84 V
1762275024	9 Pkt	8 Pkt	92 Pkt	-65 dBm	13.84 V
1762274149	11 Pkt	7 Pkt	101 Pkt	-60 dBm	13.84 V
1762274090	7 Pkt	7 Pkt	108 Pkt	-60 dBm	13.84 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)