This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732295775 | 354 | 848 | 408 | 627 | 0 |
| 1732294909 | 354 | 845 | 413 | 624 | 0 |
| 1732293975 | 352 | 845 | 413 | 623 | 0 |
| 1732293110 | 352 | 844 | 413 | 622 | 0 |
| 1732292176 | 353 | 842 | 413 | 620 | 0 |
| 1732291309 | 353 | 840 | 408 | 619 | 0 |
| 1732290377 | 352 | 839 | 408 | 617 | 0 |
| 1732289510 | 353 | 836 | 408 | 615 | 0 |
| 1732288580 | 353 | 836 | 413 | 615 | 0 |
| 1732287710 | 352 | 836 | 408 | 614 | 0 |
| 1732286780 | 352 | 834 | 408 | 611 | 0 |
| 1732285911 | 353 | 833 | 408 | 610 | 0 |
| 1732284981 | 354 | 831 | 408 | 608 | 0 |
| 1732284110 | 353 | 828 | 408 | 607 | 0 |
| 1732283182 | 353 | 826 | 402 | 604 | 0 |
| 1732282311 | 354 | 824 | 408 | 601 | 0 |
| 1732281384 | 353 | 821 | 397 | 598 | 0 |
| 1732280510 | 353 | 818 | 402 | 594 | 0 |
| 1732279584 | 353 | 817 | 397 | 593 | 0 |
| 1732278711 | 352 | 818 | 397 | 591 | 0 |
| 1732277785 | 352 | 817 | 397 | 591 | 0 |
| 1732276910 | 353 | 817 | 397 | 591 | 0 |
| 1732275986 | 353 | 816 | 402 | 591 | 0 |
| 1732275111 | 353 | 816 | 397 | 590 | 0 |
| 1732274187 | 353 | 815 | 392 | 589 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)