APRS Track Direct

My position About ☰

reset

HARRY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HARRY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp*	Dg1h*	Eff1h*
1750244521	13.43 Volt	32.5 C	30 Pkt	86 Pcnt
1750243921	13.13 Volt	33.5 C	20 Pkt	87 Pcnt
1750243321	13.43 Volt	33 C	30 Pkt	86 Pcnt
1750242721	13.5 Volt	31 C	30 Pkt	86 Pcnt
1750242121	13.43 Volt	33 C	30 Pkt	90 Pcnt
1750241521	13.43 Volt	32.5 C	20 Pkt	88 Pcnt
1750240921	13.43 Volt	33.5 C	30 Pkt	86 Pcnt
1750240321	13.35 Volt	33 C	20 Pkt	87 Pcnt
1750239721	13.43 Volt	31.5 C	20 Pkt	86 Pcnt
1750239121	13.43 Volt	33 C	30 Pkt	86 Pcnt
1750238522	13.43 Volt	32.5 C	30 Pkt	86 Pcnt
1750237924	13.43 Volt	33.5 C	20 Pkt	88 Pcnt
1750237321	13.43 Volt	32.5 C	20 Pkt	85 Pcnt
1750236722	13.43 Volt	32.5 C	20 Pkt	84 Pcnt
1750236121	13.43 Volt	33 C	20 Pkt	85 Pcnt
1750235521	13.43 Volt	31 C	20 Pkt	84 Pcnt
1750234929	13.43 Volt	33 C	20 Pkt	84 Pcnt
1750234321	13.43 Volt	32.5 C	20 Pkt	83 Pcnt
1750233721	13.43 Volt	33.5 C	20 Pkt	85 Pcnt
1750233126	13.13 Volt	33 C	30 Pkt	87 Pcnt
1750232524	13.43 Volt	30.5 C	20 Pkt	87 Pcnt
1750231921	13.43 Volt	33 C	30 Pkt	86 Pcnt
1750231322	13.43 Volt	32.5 C	20 Pkt	88 Pcnt
1750230722	13.43 Volt	33.5 C	20 Pkt	87 Pcnt
1750230122	13.43 Volt	32.5 C	30 Pkt	86 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0.5, -59

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)