This is the latest recevied telemetry packets stored in our database for station/object PY2KGL-R. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274457 | 0 | 14 | 0 | 1 | 0 |
| 1836274307 | 0 | 16 | 0 | 2 | 0 |
| 1766282529 | 0 | 32 | 0 | 1 | 0 |
| 1766281929 | 1 | 18 | 1 | 3 | 0 |
| 1766281329 | 64 | 93 | 13 | 10 | 0 |
| 1766280729 | 54 | 102 | 15 | 13 | 0 |
| 1766280129 | 25 | 42 | 2 | 2 | 0 |
| 1766279529 | 0 | 18 | 0 | 3 | 0 |
| 1766278929 | 0 | 31 | 0 | 1 | 0 |
| 1766278329 | 13 | 28 | 1 | 2 | 0 |
| 1766277729 | 2 | 18 | 2 | 2 | 0 |
| 1766277129 | 1 | 36 | 1 | 2 | 0 |
| 1766276529 | 0 | 14 | 0 | 1 | 0 |
| 1766275929 | 2 | 17 | 1 | 2 | 0 |
| 1766275329 | 6 | 39 | 2 | 3 | 0 |
| 1766274729 | 0 | 14 | 0 | 1 | 0 |
| 1766274129 | 0 | 16 | 0 | 2 | 0 |
| 1766273529 | 5 | 44 | 2 | 4 | 0 |
| 1766272929 | 0 | 14 | 0 | 1 | 0 |
| 1766272329 | 0 | 14 | 0 | 1 | 0 |
| 1766271729 | 0 | 38 | 0 | 3 | 0 |
| 1766271129 | 0 | 21 | 0 | 3 | 0 |
| 1766270529 | 0 | 14 | 0 | 1 | 0 |
| 1766269929 | 0 | 47 | 0 | 7 | 0 |
| 1766269329 | 1 | 16 | 1 | 2 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)