This is the latest recevied telemetry packets stored in our database for station/object DB0II-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786744652 | 31.1 deg C | 39.2 % | 0 | 0 | 0 |
| 1786743752 | 30.7 deg C | 39.9 % | 0 | 0 | 0 |
| 1786742852 | 30.5 deg C | 39.9 % | 0 | 0 | 0 |
| 1786741952 | 30.6 deg C | 39.9 % | 0 | 0 | 0 |
| 1786741052 | 29.8 deg C | 41.4 % | 0 | 0 | 0 |
| 1786740152 | 30.7 deg C | 40.1 % | 0 | 0 | 0 |
| 1786739251 | 29.9 deg C | 40.6 % | 0 | 0 | 0 |
| 1786738351 | 30.3 deg C | 40 % | 0 | 0 | 0 |
| 1786737451 | 30.6 deg C | 39.4 % | 0 | 0 | 0 |
| 1786736551 | 30.9 deg C | 38.8 % | 0 | 0 | 0 |
| 1786735651 | 31.1 deg C | 38.2 % | 0 | 0 | 0 |
| 1786734751 | 31.6 deg C | 37.3 % | 0 | 0 | 0 |
| 1786733851 | 31.7 deg C | 36.9 % | 0 | 0 | 0 |
| 1786732951 | 32.4 deg C | 36.1 % | 0 | 0 | 0 |
| 1786732051 | 32.9 deg C | 34.8 % | 0 | 0 | 0 |
| 1786731150 | 33.3 deg C | 34.7 % | 0 | 0 | 0 |
| 1786730250 | 33.7 deg C | 34.2 % | 0 | 0 | 0 |
| 1786729350 | 34.5 deg C | 33 % | 0 | 0 | 0 |
| 1786728450 | 35.5 deg C | 32 % | 0 | 0 | 0 |
| 1786727550 | 35.1 deg C | 32.1 % | 0 | 0 | 0 |
| 1786726650 | 37 deg C | 30.1 % | 0 | 0 | 0 |
| 1786725750 | 37.2 deg C | 29.9 % | 0 | 0 | 0 |
| 1786724850 | 36.9 deg C | 29.6 % | 0 | 0 | 0 |
| 1786723950 | 37.6 deg C | 29.2 % | 0 | 0 | 0 |
| 1786723050 | 37.1 deg C | 28.9 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)