APRS Track Direct

My position About ☰

reset

KK7FIU-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK7FIU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1836274809	13.5 Volt	240 Pkt	79 Pcnt	21 C
1836274509	13.5 Volt	240 Pkt	79 Pcnt	21 C
1836274359	13.5 Volt	250 Pkt	82 Pcnt	20 C
1836274209	13.5 Volt	250 Pkt	79 Pcnt	21 C
1836273909	13.58 Volt	230 Pkt	79 Pcnt	20.5 C
1762338621	13.58 Volt	430 Pkt	97 Pcnt	14 C
1762338321	13.58 Volt	440 Pkt	97 Pcnt	14 C
1762338021	13.58 Volt	450 Pkt	97 Pcnt	14 C
1762337721	13.5 Volt	450 Pkt	97 Pcnt	14 C
1762337421	13.5 Volt	450 Pkt	97 Pcnt	14 C
1762337121	13.5 Volt	450 Pkt	97 Pcnt	14 C
1762336821	13.5 Volt	450 Pkt	96 Pcnt	14 C
1762336522	13.5 Volt	470 Pkt	96 Pcnt	14 C
1762336222	13.58 Volt	470 Pkt	97 Pcnt	14 C
1762335921	13.58 Volt	480 Pkt	96 Pcnt	14 C
1762335622	13.58 Volt	480 Pkt	96 Pcnt	14 C
1762335322	13.5 Volt	480 Pkt	96 Pcnt	14 C
1762335022	13.5 Volt	470 Pkt	95 Pcnt	14 C
1762334721	13.5 Volt	480 Pkt	96 Pcnt	14 C
1762334422	13.5 Volt	470 Pkt	96 Pcnt	14 C
1762334122	13.5 Volt	480 Pkt	96 Pcnt	14 C
1762333822	13.5 Volt	460 Pkt	95 Pcnt	14 C
1762333521	13.5 Volt	470 Pkt	96 Pcnt	14 C
1762333221	13.58 Volt	450 Pkt	96 Pcnt	14 C
1762332922	13.58 Volt	460 Pkt	96 Pcnt	14 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -62

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)