This is the latest recevied telemetry packets stored in our database for station/object YO3FBD-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp_interioara* | Temp_exterioara* | Temp_TX_RoLink* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732267866 | 9.6 C | 2.9 C | 11.2 C | 0 | 0 |
| 1732267271 | 9.1 C | 2.6 C | 10.9 C | 0 | 0 |
| 1732266671 | 8.7 C | 2.4 C | 10.4 C | 0 | 0 |
| 1732266071 | 8.2 C | 1.9 C | 10.2 C | 0 | 0 |
| 1732265466 | 8.1 C | 1.8 C | 10.1 C | 0 | 0 |
| 1732264866 | 7.9 C | 1.6 C | 9.9 C | 0 | 0 |
| 1732264266 | 7.7 C | 1.5 C | 9.7 C | 0 | 0 |
| 1732263671 | 7.4 C | 1.2 C | 9.6 C | 0 | 0 |
| 1732263071 | 7.4 C | 1.1 C | 9.5 C | 0 | 0 |
| 1732262471 | 7.3 C | 1.1 C | 9.4 C | 0 | 0 |
| 1732261866 | 7.2 C | 1.1 C | 9.2 C | 0 | 0 |
| 1732261266 | 7 C | 0.9 C | 9.1 C | 0 | 0 |
| 1732260672 | 6.9 C | 0.8 C | 9.1 C | 0 | 0 |
| 1732260071 | 6.8 C | 0.7 C | 9 C | 0 | 0 |
| 1732259472 | 6.8 C | 0.7 C | 8.9 C | 0 | 0 |
| 1732258872 | 6.5 C | 0.6 C | 8.7 C | 0 | 0 |
| 1732258266 | 6.2 C | 0.6 C | 8.4 C | 0 | 0 |
| 1732257666 | 5.9 C | 0.3 C | 8.2 C | 0 | 0 |
| 1732257072 | 5.8 C | 0.2 C | 8.1 C | 0 | 0 |
| 1732256471 | 5.6 C | 0 C | 8.1 C | 0 | 0 |
| 1732255871 | 5.6 C | -0.1 C | 8.2 C | 0 | 0 |
| 1732255271 | 5.6 C | -0.1 C | 8.6 C | 0 | 0 |
| 1732254666 | 5.7 C | -0.2 C | 8.9 C | 0 | 0 |
| 1732254066 | 5.9 C | -0.2 C | 9.6 C | 0 | 0 |
| 1732253471 | 6.2 C | -0.2 C | 10.8 C | 0 | 0 |
*Used Equation Coefficients:
Temp_interioara: 0, 1, -100
Temp_exterioara: 0, 1, -100
Temp_TX_RoLink: 0, 1, -100
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)