This is the latest recevied telemetry packets stored in our database for station/object OE1KDA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eCO2* | Temp.out* |
|---|---|---|---|---|---|
| 1791748505 | 0 hPa | 0 C deg | 0 % | 1093 ppm | 0 C deg |
| 1791746688 | 0 hPa | 0 C deg | 0 % | 1004 ppm | 0 C deg |
| 1791744872 | 0 hPa | 0 C deg | 0 % | 804 ppm | 0 C deg |
| 1791743060 | 0 hPa | 0 C deg | 0 % | 574 ppm | 0 C deg |
| 1791741247 | 0 hPa | 0 C deg | 0 % | 536 ppm | 0 C deg |
| 1791737615 | 0 hPa | 0 C deg | 0 % | 526 ppm | 0 C deg |
| 1791735805 | 0 hPa | 0 C deg | 0 % | 548 ppm | 0 C deg |
| 1791733983 | 0 hPa | 0 C deg | 0 % | 487 ppm | 0 C deg |
| 1791732170 | 0 hPa | 0 C deg | 0 % | 448 ppm | 0 C deg |
| 1791728541 | 0 hPa | 0 C deg | 0 % | 657 ppm | 0 C deg |
| 1791726737 | 0 hPa | 0 C deg | 0 % | 808 ppm | 0 C deg |
| 1791724908 | 0 hPa | 0 C deg | 0 % | 918 ppm | 0 C deg |
| 1791723098 | 0 hPa | 0 C deg | 0 % | 902 ppm | 0 C deg |
| 1791721281 | 0 hPa | 0 C deg | 0 % | 795 ppm | 0 C deg |
| 1791719466 | 0 hPa | 0 C deg | 0 % | 666 ppm | 0 C deg |
| 1791717650 | 0 hPa | 0 C deg | 0 % | 596 ppm | 0 C deg |
| 1791715832 | 0 hPa | 0 C deg | 0 % | 570 ppm | 0 C deg |
| 1791714025 | 0 hPa | 0 C deg | 0 % | 607 ppm | 0 C deg |
| 1791712205 | 0 hPa | 0 C deg | 0 % | 710 ppm | 0 C deg |
| 1791710392 | 0 hPa | 0 C deg | 0 % | 735 ppm | 0 C deg |
| 1791708573 | 0 hPa | 0 C deg | 0 % | 868 ppm | 0 C deg |
| 1791706776 | 0 hPa | 0 C deg | 0 % | 752 ppm | 0 C deg |
| 1791703128 | 0 hPa | 0 C deg | 0 % | 623 ppm | 0 C deg |
| 1791701313 | 0 hPa | 0 C deg | 0 % | 543 ppm | 0 C deg |
| 1791699502 | 0 hPa | 0 C deg | 0 % | 533 ppm | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eCO2: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)