This is the latest recevied telemetry packets stored in our database for station/object KI6TSF-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774139953 | 23 | 30 | 22 | 6 | 0 |
| 1774139051 | 21 | 29 | 22 | 5 | 0 |
| 1774138153 | 20 | 29 | 22 | 5 | 0 |
| 1774133897 | 22 | 28 | 20 | 3 | 0 |
| 1774132695 | 23 | 28 | 20 | 3 | 0 |
| 1774132394 | 21 | 28 | 20 | 3 | 0 |
| 1774131793 | 23 | 28 | 20 | 3 | 0 |
| 1774129388 | 19 | 27 | 19 | 1 | 0 |
| 1774128489 | 23 | 26 | 20 | 1 | 0 |
| 1774127933 | 23 | 26 | 20 | 1 | 0 |
| 1774127632 | 28 | 26 | 20 | 1 | 0 |
| 1774127332 | 23 | 26 | 20 | 1 | 0 |
| 1774126129 | 28 | 25 | 19 | 0 | 0 |
| 1774125531 | 21 | 25 | 20 | 1 | 0 |
| 1774124325 | 20 | 25 | 20 | 1 | 0 |
| 1774124025 | 23 | 25 | 20 | 1 | 0 |
| 1774121923 | 22 | 25 | 21 | 1 | 0 |
| 1774121620 | 22 | 25 | 20 | 1 | 0 |
| 1774121018 | 23 | 24 | 21 | 0 | 0 |
| 1774119515 | 23 | 24 | 21 | 0 | 0 |
| 1774118613 | 21 | 24 | 21 | 0 | 0 |
| 1774118316 | 19 | 24 | 22 | 1 | 0 |
| 1774117739 | 21 | 23 | 21 | 0 | 0 |
| 1774117138 | 23 | 23 | 21 | 0 | 0 |
| 1774116540 | 22 | 23 | 21 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)