APRS Track Direct

My position About ☰

reset

E24OWX-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E24OWX-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	SUN*
1750164461	0 Pkt	0 Pkt	0 Pkt	-40 dBm	0 %
1750163539	0 Pkt	0 Pkt	0 Pkt	-41 dBm	0 %
1750162618	0 Pkt	0 Pkt	0 Pkt	-42 dBm	0 %
1750161695	0 Pkt	0 Pkt	0 Pkt	-41 dBm	0 %
1750160773	0 Pkt	0 Pkt	0 Pkt	-41 dBm	0 %
1750159851	0 Pkt	0 Pkt	0 Pkt	-41 dBm	0 %
1750158929	0 Pkt	0 Pkt	0 Pkt	-41 dBm	0 %
1750158007	0 Pkt	0 Pkt	0 Pkt	-43 dBm	0 %
1750157085	0 Pkt	0 Pkt	0 Pkt	-41 dBm	0 %
1750156163	0 Pkt	0 Pkt	0 Pkt	-42 dBm	0 %
1750155242	0 Pkt	0 Pkt	0 Pkt	-42 dBm	0 %
1750154320	0 Pkt	0 Pkt	0 Pkt	-42 dBm	0 %
1750153398	0 Pkt	0 Pkt	0 Pkt	-42 dBm	0 %
1750152475	0 Pkt	0 Pkt	0 Pkt	-40 dBm	0 %
1750151553	0 Pkt	0 Pkt	0 Pkt	-42 dBm	0 %
1750150631	0 Pkt	0 Pkt	0 Pkt	-41 dBm	0 %
1750149710	0 Pkt	0 Pkt	0 Pkt	-42 dBm	0 %
1750148788	0 Pkt	0 Pkt	0 Pkt	-41 dBm	0 %
1750147865	0 Pkt	0 Pkt	0 Pkt	-41 dBm	0 %
1750146943	0 Pkt	0 Pkt	0 Pkt	-41 dBm	0 %
1750146022	0 Pkt	0 Pkt	0 Pkt	-42 dBm	0 %
1750145099	0 Pkt	0 Pkt	0 Pkt	-41 dBm	0 %
1750144177	0 Pkt	0 Pkt	0 Pkt	-42 dBm	0 %
1750143255	0 Pkt	0 Pkt	0 Pkt	-41 dBm	0 %
1750142333	0 Pkt	0 Pkt	0 Pkt	-40 dBm	0 %

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

SUN: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)