This is the latest recevied telemetry packets stored in our database for station/object IK2UUJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791807853 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1791806952 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791806051 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1791805150 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791804249 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791803349 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791802448 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791801548 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791800646 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791799745 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791798844 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791797943 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791797042 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791796141 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791795240 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791794339 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791793439 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791792538 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791791638 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791790737 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791789837 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791788936 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791788035 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791787134 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791786233 | 4.21 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)