This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766235314 | 0 Count | 896 Count | 0 Count | 0 VDC | 0 VDC |
| 1766234114 | 0 Count | 896 Count | 0 Count | 0 VDC | 0 VDC |
| 1766232914 | 0 Count | 896 Count | 0 Count | 0 VDC | 0 VDC |
| 1766231714 | 0 Count | 896 Count | 0 Count | 0 VDC | 0 VDC |
| 1766230514 | 0 Count | 882 Count | 0 Count | 0 VDC | 0 VDC |
| 1766229314 | 0 Count | 874 Count | 0 Count | 0 VDC | 0 VDC |
| 1766229074 | 0 Count | 874 Count | 0 Count | 0 VDC | 0 VDC |
| 1766227874 | 0 Count | 863 Count | 0 Count | 0 VDC | 0 VDC |
| 1766226674 | 0 Count | 862 Count | 0 Count | 0 VDC | 0 VDC |
| 1766225474 | 0 Count | 862 Count | 0 Count | 0 VDC | 0 VDC |
| 1766224274 | 0 Count | 850 Count | 0 Count | 0 VDC | 0 VDC |
| 1766222991 | 0 Count | 224 Count | 0 Count | 0 VDC | 0 VDC |
| 1766221791 | 0 Count | 224 Count | 0 Count | 0 VDC | 0 VDC |
| 1766220591 | 0 Count | 224 Count | 0 Count | 0 VDC | 0 VDC |
| 1766219391 | 0 Count | 224 Count | 0 Count | 0 VDC | 0 VDC |
| 1766218191 | 0 Count | 224 Count | 0 Count | 0 VDC | 0 VDC |
| 1766216991 | 0 Count | 195 Count | 0 Count | 0 VDC | 0 VDC |
| 1766215791 | 0 Count | 166 Count | 0 Count | 0 VDC | 0 VDC |
| 1766214591 | 0 Count | 164 Count | 0 Count | 0 VDC | 0 VDC |
| 1766213391 | 0 Count | 164 Count | 0 Count | 0 VDC | 0 VDC |
| 1766212191 | 0 Count | 164 Count | 0 Count | 0 VDC | 0 VDC |
| 1766210991 | 0 Count | 164 Count | 0 Count | 0 VDC | 0 VDC |
| 1766209791 | 0 Count | 164 Count | 0 Count | 0 VDC | 0 VDC |
| 1766208590 | 0 Count | 148 Count | 0 Count | 0 VDC | 0 VDC |
| 1766207389 | 0 Count | 109 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)