APRS Track Direct

My position About ☰

reset

ON6YF-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON6YF-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1750128990	12.6 Volt	600 Pkt	200 Pkt	55 Pcnt
1750128990	12.6 Volt	600 Pkt	200 Pkt	55 Pcnt
1750128690	12.6 Volt	590 Pkt	200 Pkt	55 Pcnt
1750128390	12.6 Volt	570 Pkt	190 Pkt	54 Pcnt
1750128090	12.6 Volt	560 Pkt	190 Pkt	54 Pcnt
1750127790	12.6 Volt	550 Pkt	180 Pkt	56 Pcnt
1750127490	12.6 Volt	550 Pkt	180 Pkt	56 Pcnt
1750127191	12.6 Volt	560 Pkt	190 Pkt	57 Pcnt
1750127190	12.6 Volt	560 Pkt	190 Pkt	57 Pcnt
1750126890	12.6 Volt	560 Pkt	190 Pkt	58 Pcnt
1750126590	12.6 Volt	540 Pkt	180 Pkt	58 Pcnt
1750126290	12.6 Volt	530 Pkt	180 Pkt	58 Pcnt
1750125990	12.6 Volt	530 Pkt	180 Pkt	58 Pcnt
1750125690	12.6 Volt	520 Pkt	170 Pkt	57 Pcnt
1750125391	12.6 Volt	510 Pkt	180 Pkt	58 Pcnt
1750125390	12.6 Volt	510 Pkt	180 Pkt	58 Pcnt
1750125090	12.6 Volt	520 Pkt	170 Pkt	58 Pcnt
1750124790	12.6 Volt	530 Pkt	170 Pkt	58 Pcnt
1750124490	12.6 Volt	540 Pkt	170 Pkt	58 Pcnt
1750124190	12.6 Volt	550 Pkt	170 Pkt	60 Pcnt
1750123890	12.6 Volt	550 Pkt	170 Pkt	59 Pcnt
1750123591	12.6 Volt	560 Pkt	160 Pkt	57 Pcnt
1750123590	12.6 Volt	560 Pkt	160 Pkt	57 Pcnt
1750123290	12.6 Volt	580 Pkt	160 Pkt	59 Pcnt
1750122990	12.6 Volt	600 Pkt	170 Pkt	59 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)