This is the latest recevied telemetry packets stored in our database for station/object DB0OTV-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274457 | 156 | 161 | 249 | 0 | 0 |
| 1782504793 | 165 | 165 | 250 | 0 | 0 |
| 1782501671 | 165 | 165 | 250 | 0 | 0 |
| 1782498545 | 165 | 165 | 250 | 0 | 0 |
| 1782495427 | 165 | 166 | 250 | 0 | 0 |
| 1782492308 | 165 | 169 | 250 | 0 | 0 |
| 1782489206 | 165 | 175 | 250 | 0 | 0 |
| 1782486190 | 165 | 174 | 250 | 0 | 0 |
| 1782483176 | 164 | 175 | 251 | 0 | 0 |
| 1782480160 | 165 | 174 | 251 | 0 | 0 |
| 1782477145 | 164 | 175 | 250 | 0 | 0 |
| 1782474128 | 164 | 174 | 250 | 0 | 0 |
| 1782471072 | 164 | 174 | 250 | 0 | 0 |
| 1782467929 | 163 | 174 | 251 | 0 | 0 |
| 1782464818 | 163 | 175 | 250 | 0 | 0 |
| 1782461710 | 163 | 175 | 250 | 0 | 0 |
| 1782455487 | 162 | 183 | 252 | 0 | 0 |
| 1782452357 | 162 | 182 | 252 | 0 | 0 |
| 1782449227 | 162 | 174 | 251 | 0 | 0 |
| 1782446088 | 162 | 162 | 249 | 0 | 0 |
| 1782442950 | 162 | 162 | 249 | 0 | 0 |
| 1782439810 | 162 | 162 | 249 | 0 | 0 |
| 1782436653 | 162 | 163 | 249 | 0 | 0 |
| 1782433520 | 163 | 162 | 249 | 0 | 0 |
| 1782430393 | 163 | 163 | 249 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)