This is the latest recevied telemetry packets stored in our database for station/object IZ2UQD-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10m* | Rx1h* | Dg10m* | Dg1h* | Eff1h* |
|---|---|---|---|---|---|
| 1836274494 | 27 Pkt | 140 Pkt | 8 Pkt | 30 Pkt | 85 Pcnt |
| 1836274343 | 30 Pkt | 150 Pkt | 8 Pkt | 30 Pkt | 85 Pcnt |
| 1782523145 | 10 Pkt | 90 Pkt | 3 Pkt | 30 Pkt | 95 Pcnt |
| 1782519542 | 8 Pkt | 90 Pkt | 3 Pkt | 30 Pkt | 90 Pcnt |
| 1782517741 | 7 Pkt | 100 Pkt | 3 Pkt | 30 Pkt | 94 Pcnt |
| 1782514137 | 9 Pkt | 90 Pkt | 3 Pkt | 30 Pkt | 96 Pcnt |
| 1782513237 | 8 Pkt | 90 Pkt | 3 Pkt | 30 Pkt | 95 Pcnt |
| 1782498824 | 11 Pkt | 90 Pkt | 3 Pkt | 30 Pkt | 98 Pcnt |
| 1782497022 | 9 Pkt | 80 Pkt | 3 Pkt | 30 Pkt | 92 Pcnt |
| 1782484411 | 8 Pkt | 130 Pkt | 3 Pkt | 50 Pkt | 85 Pcnt |
| 1782483510 | 9 Pkt | 150 Pkt | 3 Pkt | 70 Pkt | 86 Pcnt |
| 1782481709 | 35 Pkt | 130 Pkt | 17 Pkt | 60 Pkt | 83 Pcnt |
| 1782479006 | 8 Pkt | 90 Pkt | 3 Pkt | 30 Pkt | 87 Pcnt |
| 1782476304 | 8 Pkt | 100 Pkt | 3 Pkt | 40 Pkt | 77 Pcnt |
| 1782475403 | 22 Pkt | 90 Pkt | 10 Pkt | 40 Pkt | 78 Pcnt |
| 1782474502 | 8 Pkt | 80 Pkt | 3 Pkt | 30 Pkt | 83 Pcnt |
| 1782473601 | 10 Pkt | 70 Pkt | 4 Pkt | 30 Pkt | 78 Pcnt |
| 1782472701 | 7 Pkt | 70 Pkt | 3 Pkt | 30 Pkt | 85 Pcnt |
| 1782471800 | 7 Pkt | 70 Pkt | 3 Pkt | 30 Pkt | 82 Pcnt |
| 1782470899 | 6 Pkt | 70 Pkt | 3 Pkt | 30 Pkt | 78 Pcnt |
| 1782469998 | 7 Pkt | 70 Pkt | 3 Pkt | 30 Pkt | 81 Pcnt |
| 1782469097 | 8 Pkt | 70 Pkt | 3 Pkt | 30 Pkt | 82 Pcnt |
| 1782468197 | 5 Pkt | 70 Pkt | 3 Pkt | 30 Pkt | 84 Pcnt |
| 1782466395 | 7 Pkt | 70 Pkt | 3 Pkt | 30 Pkt | 75 Pcnt |
| 1782450181 | 9 Pkt | 100 Pkt | 3 Pkt | 30 Pkt | 93 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)