This is the latest recevied telemetry packets stored in our database for station/object FW0690. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vcc* | RSSI* | Load* | IRed* | Visb* |
|---|---|---|---|---|---|
| 1794903735 | 3.48 V | -71 dBm | 5.2 % | 9472 u | 18688 u |
| 1794903375 | 3.48 V | -69 dBm | 5.2 % | 8704 u | 16640 u |
| 1794903015 | 3.48 V | -72 dBm | 5.2 % | 5120 u | 10496 u |
| 1794902655 | 3.49 V | -69 dBm | 6 % | 8448 u | 16384 u |
| 1794902295 | 3.49 V | -73 dBm | 5.6 % | 6656 u | 14080 u |
| 1794901935 | 3.49 V | -72 dBm | 5.6 % | 3328 u | 7168 u |
| 1794901575 | 3.48 V | -71 dBm | 5.2 % | 7168 u | 13824 u |
| 1794901215 | 3.49 V | -71 dBm | 5.2 % | 5632 u | 11264 u |
| 1794900855 | 3.48 V | -70 dBm | 5.2 % | 1280 u | 3328 u |
| 1794900495 | 3.48 V | -71 dBm | 6 % | 1536 u | 3584 u |
| 1794900135 | 3.49 V | -72 dBm | 6 % | 1024 u | 2816 u |
| 1794899775 | 3.49 V | -70 dBm | 5.2 % | 1024 u | 2304 u |
| 1794899415 | 3.49 V | -71 dBm | 5.2 % | 768 u | 1792 u |
| 1794899055 | 3.49 V | -71 dBm | 5.2 % | 1024 u | 2304 u |
| 1794898695 | 3.49 V | -69 dBm | 5.6 % | 768 u | 2048 u |
| 1794898335 | 3.49 V | -71 dBm | 6 % | 768 u | 2048 u |
| 1794897975 | 3.49 V | -72 dBm | 5.2 % | 512 u | 1280 u |
| 1794897615 | 3.49 V | -69 dBm | 5.2 % | 512 u | 1536 u |
| 1794897255 | 3.49 V | -71 dBm | 5.2 % | 768 u | 1792 u |
| 1794896895 | 3.49 V | -71 dBm | 6 % | 768 u | 1792 u |
| 1794896535 | 3.49 V | -72 dBm | 6 % | 768 u | 1792 u |
| 1794896175 | 3.49 V | -69 dBm | 6 % | 512 u | 1280 u |
| 1794895815 | 3.49 V | -76 dBm | 5.2 % | 512 u | 1280 u |
| 1794895455 | 3.49 V | -75 dBm | 5.2 % | 512 u | 1280 u |
| 1794895095 | 3.48 V | -77 dBm | 5.6 % | 256 u | 1024 u |
*Used Equation Coefficients:
Vcc: 0, 0.004, 2.5
RSSI: 0, -1, 0
Load: 0, 0.4, 0
IRed: 0, 256, 0
Visb: 0, 256, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)