APRS Track Direct

My position About ☰

reset

SADDLE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SADDLE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1766270547	14.18 Volt	900 Pkt	40 Pkt	71 Pcnt
1766270546	14.18 Volt	900 Pkt	40 Pkt	71 Pcnt
1766266947	14.18 Volt	860 Pkt	20 Pkt	71 Pcnt
1766266946	14.18 Volt	860 Pkt	20 Pkt	71 Pcnt
1766263349	14.18 Volt	890 Pkt	40 Pkt	73 Pcnt
1766263346	14.18 Volt	890 Pkt	40 Pkt	73 Pcnt
1766259750	14.18 Volt	850 Pkt	30 Pkt	71 Pcnt
1766259746	14.18 Volt	850 Pkt	30 Pkt	71 Pcnt
1766256148	14.18 Volt	880 Pkt	30 Pkt	77 Pcnt
1766256146	14.18 Volt	880 Pkt	30 Pkt	77 Pcnt
1766252549	14.18 Volt	720 Pkt	40 Pkt	74 Pcnt
1766252546	14.18 Volt	720 Pkt	40 Pkt	74 Pcnt
1766248947	14.18 Volt	720 Pkt	20 Pkt	72 Pcnt
1766248946	14.18 Volt	720 Pkt	20 Pkt	72 Pcnt
1766245350	14.18 Volt	710 Pkt	20 Pkt	71 Pcnt
1766245346	14.18 Volt	710 Pkt	20 Pkt	71 Pcnt
1766241750	14.18 Volt	710 Pkt	10 Pkt	72 Pcnt
1766241747	14.18 Volt	710 Pkt	10 Pkt	72 Pcnt
1766238147	14.18 Volt	680 Pkt	10 Pkt	71 Pcnt
1766238147	14.18 Volt	680 Pkt	10 Pkt	71 Pcnt
1766234559	14.18 Volt	710 Pkt	20 Pkt	72 Pcnt
1766234547	14.18 Volt	710 Pkt	20 Pkt	72 Pcnt
1766230950	14.18 Volt	640 Pkt	20 Pkt	70 Pcnt
1766230947	14.18 Volt	640 Pkt	20 Pkt	70 Pcnt
1766227348	14.18 Volt	640 Pkt	10 Pkt	66 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)