This is the latest recevied telemetry packets stored in our database for station/object ER-DB0ET. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753817006 | 13 | 72 | 2 | 5 | 0 |
| 1753816406 | 9 | 193 | 3 | 8 | 0 |
| 1753815806 | 3 | 999 | 4 | 1 | 0 |
| 1753815206 | 5 | 483 | 4 | 3 | 0 |
| 1753814606 | 0 | 47 | 0 | 3 | 0 |
| 1753814006 | 0 | 54 | 0 | 3 | 0 |
| 1753813406 | 2 | 76 | 1 | 5 | 0 |
| 1753812806 | 11 | 163 | 3 | 7 | 0 |
| 1753812206 | 0 | 46 | 0 | 3 | 0 |
| 1753811606 | 0 | 80 | 0 | 5 | 0 |
| 1753811006 | 0 | 77 | 0 | 3 | 0 |
| 1753810406 | 0 | 65 | 0 | 5 | 0 |
| 1753809806 | 0 | 67 | 0 | 5 | 0 |
| 1753809206 | 4 | 131 | 4 | 7 | 0 |
| 1753808606 | 3 | 100 | 1 | 6 | 0 |
| 1753808006 | 0 | 14 | 0 | 1 | 0 |
| 1753807406 | 0 | 112 | 0 | 5 | 0 |
| 1753806806 | 0 | 400 | 0 | 5 | 0 |
| 1753806206 | 0 | 115 | 0 | 7 | 0 |
| 1753805606 | 0 | 18 | 0 | 2 | 0 |
| 1753805006 | 0 | 596 | 0 | 4 | 0 |
| 1753804406 | 0 | 46 | 0 | 3 | 0 |
| 1753803806 | 0 | 14 | 0 | 1 | 0 |
| 1753803206 | 83 | 384 | 4 | 9 | 0 |
| 1753802606 | 228 | 999 | 8 | 1 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)