This is the latest recevied telemetry packets stored in our database for station/object DL9AM-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758173831 | 25.9 deg C | 41.9 % | 1019.9 hPa | 0 | 0 |
| 1758172933 | 26 deg C | 42 % | 1019.9 hPa | 0 | 0 |
| 1758172030 | 26 deg C | 41.3 % | 1019.8 hPa | 0 | 0 |
| 1758171126 | 25.9 deg C | 41.3 % | 1019.7 hPa | 0 | 0 |
| 1758169321 | 26 deg C | 41.2 % | 1018.8 hPa | 0 | 0 |
| 1758168421 | 25.9 deg C | 41.3 % | 1018.7 hPa | 0 | 0 |
| 1758167522 | 26 deg C | 41.2 % | 1018.7 hPa | 0 | 0 |
| 1758166623 | 25.9 deg C | 41.2 % | 1018.8 hPa | 0 | 0 |
| 1758165726 | 25.9 deg C | 41.2 % | 1018.3 hPa | 0 | 0 |
| 1758164831 | 25.9 deg C | 41.2 % | 1018.6 hPa | 0 | 0 |
| 1758163930 | 26 deg C | 41.1 % | 1018.9 hPa | 0 | 0 |
| 1758163030 | 26 deg C | 41 % | 1018.9 hPa | 0 | 0 |
| 1758162131 | 26 deg C | 40.9 % | 1019 hPa | 0 | 0 |
| 1758161228 | 26 deg C | 40.9 % | 1018.5 hPa | 0 | 0 |
| 1758160328 | 26 deg C | 40.9 % | 1018.4 hPa | 0 | 0 |
| 1758159426 | 26 deg C | 40.8 % | 1019.7 hPa | 0 | 0 |
| 1758158528 | 25.9 deg C | 40.8 % | 1020.2 hPa | 0 | 0 |
| 1758157626 | 25.9 deg C | 40.8 % | 1018.9 hPa | 0 | 0 |
| 1758156725 | 26 deg C | 40.7 % | 1018.8 hPa | 0 | 0 |
| 1758155829 | 25.9 deg C | 40.7 % | 1019.4 hPa | 0 | 0 |
| 1758154931 | 25.9 deg C | 40.7 % | 1019.1 hPa | 0 | 0 |
| 1758154036 | 25.9 deg C | 40.6 % | 1020 hPa | 0 | 0 |
| 1758153134 | 26 deg C | 40.4 % | 1019.9 hPa | 0 | 0 |
| 1758152236 | 25.9 deg C | 40.4 % | 1020.1 hPa | 0 | 0 |
| 1758151337 | 25.9 deg C | 40.4 % | 1020 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)