APRS Track Direct

My position About ☰

reset

HS2AC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS2AC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1836274684	29 Pkt	-54 dBm	14.36 V
1836274565	36 Pkt	-54 dBm	14.36 V
1836274054	34 Pkt	-54 dBm	14.38 V
1762262428	8 Pkt	-52 dBm	14.13 V
1762261803	11 Pkt	-52 dBm	14.13 V
1762261178	12 Pkt	-52 dBm	14.13 V
1762260549	18 Pkt	-52 dBm	14.13 V
1762259922	9 Pkt	-52 dBm	14.13 V
1762259297	15 Pkt	-52 dBm	14.13 V
1762258669	23 Pkt	-52 dBm	14.15 V
1762258043	21 Pkt	-52 dBm	14.13 V
1762257415	17 Pkt	-55 dBm	14.17 V
1762256788	17 Pkt	-54 dBm	14.15 V
1762256160	21 Pkt	-53 dBm	14.13 V
1762255534	24 Pkt	-52 dBm	14.13 V
1762254907	12 Pkt	-52 dBm	14.13 V
1762254281	13 Pkt	-52 dBm	14.13 V
1762253655	13 Pkt	-51 dBm	14.13 V
1762253030	9 Pkt	-52 dBm	14.13 V
1762252403	13 Pkt	-52 dBm	14.13 V
1762251777	11 Pkt	-52 dBm	14.13 V
1762251151	15 Pkt	-53 dBm	14.13 V
1762250524	12 Pkt	-52 dBm	14.13 V
1762249898	14 Pkt	-52 dBm	14.11 V
1762249272	15 Pkt	-53 dBm	14.11 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)